Casio DT-X11 Manual

DT-X11 Series Hardware Manual (Version 1.01) CASIO Computer Co., Ltd. Copyright ©2006. All rights reserved. August 2

10 1.3 General Guide 1.3.1 DT-X11 Left Front Right Back222324252118191 2435796810111213141817161520 Fig. 1.2 Table 1.4 Names of parts No. Name D

11 These keys can be assigned any function other than barcode reading. The following are the initial default settings. 10 Function Keys F1 F2 F3 F4

12 1.3.2 DT-167CHGE Car Mounted Battery Charger Views Power Indicator LampPower ContactsRemove buttonCar plug code jackPower Switch Fig. 1.3

13 1.3.3 DT-160IOE Bridge Satellite Cradle The following external views show the DT-160IOE Bridge Satellite Cradle. Refer to Table 1.5 for each refe

14 No. Name Description 5 Wall Mount Unit Fastening Plate The holes in this plate accept screws that secure the wall mount unit in place. 6 Terminal

15 1.3.4 DT-169CHGE Cradle-type Battery Charger The following external views show the DT-169CHGE (Cradle-type Battery Charger). Refer to Table 1.6 f

16 1.3.5 DT-5022CHG Dual Battery Charger The following external views show the DT-5022CHG (Dual Battery Charger). Refer to Table 1.7 for each refere

17 2. Hardware Specifications 2.1 DT-X11 Table 2.1 Item Specification Remark CPU, Memory CPU Intel® PXA255 Application Processor Operating clock; m

18 Laser Scanner (DT-X11M10E and DT-X11M10RC) Method Semi-conductor laser light Laser emitting angle Straight Wave length 650±10 nm Optical

19 Bluetooth® Standard Bluetooth® Specification Ver.1.2 Comm. range Approx. 3 m Depending on the surroundingconditions Output power Maximum. 3d

2 Table of Contents Editorial Record 4 Preface 5 Chapter 1. Overview of the Products 6 1.1. Features 6 1.2. Available Models 8 1.2.1. Options

20 2.2 DT-160IOE Bridge Satellite Cradle Table 2.2 Item Specification Remark Standard IrDA Ver. 1.1 compatible Comm. method Half duplex Synchr

21 Input voltage DC 12V ±5% Consumption current Approx. 1,600 mA When supplying power or transmitting data. Plug EIAJ RC-5320A type 4 Center;

22 2.3 DT-167CHGE Car Mounted Battery Charger Table 2.4 Item Specification Remark No. of LEDs 1 No. of display colors 2 In red and gree

23 2.4 DT-169CHGE Cradle-type Battery Charger Table 2.6 Item Specification Remark No. of LEDs 1 No. of display colors 2 In red and green Displa

24 2.5 DIP Switch Setting for DT-160IOE The DIP switch is located on the rear side of Bridge Satellite Cradle. Change the ON/OFF settings according

25 2.6 Status Indication with LEDs Various operational statuses on the DT-160IOE can be displayed using the LEDs. The following table describes LED

26 2.7 DT-5022CHG Dual Battery Charger Basic Block Table 2.9 Item Specification Remark Basic function Rechargeable battery pack HA-A20BAT Battery pa

27 Charge output terminal CH1 PIN1: + 4.22V±30mV PIN2: - GND Charge output terminal CH2 PIN1: + 4.22V±30mV PIN2: - GND Input terminal

28 Table 2.13 Weight/Dimensions Item Specification Remark Weight Approx. 154 g Dimensions 100 (L) x 110 (W) x 49 (H) mm

29 2.8 HA-A20BAT/DT-5025LBAT Table 2.14 Specification Item HA-A20BAT DT-5025LBAT Remark Rated capacity 1,700 mAh 3,400 mAh 0.2C discharge Rated vo

3 5.3.4. HA-A20BAT/DT-5025LBAT 42 5.3.5. DT-894CFU CF Card Extension Unit 42 5.4. Reliability 43 5.4.1. DT-X11 43 5.4.2. DT-160IOE/DT-169CHGE

30 2.9 DT-894CFU CF Card Extension Unit Fig. 2.2 Table 2.15 Dimensions/Weight Item Specification Remark Approx. 70 (W) x 87 (D) x 13 (D) mm With

31 3. Interfaces 3.1 DT-X11 CF Extension Slot Table 3.1 Specification Remark Interface CFA Rev.1.3 compatible CF Type I/II 3.3V only Power voltage

32 Table 3.3 IrDA interface Item Specification Remark Communication speed, modulation Standard IrDA Ver. 1.1 compatible FIR 4 Mbps 4-value

33 Memory backup battery Battery type Button-shape Lithium rechargeable battery (CR-2032) Rated voltage 3.0 V Battery low warning Low main batt

34 4. Product Identification and Reference Numbers On the back of the DT-X11 and its options, there is a bar code and numbers printed on label as sh

35 5. Quality References This chapter will describe about references of the DT-X11 and its dedicated options concerned with environmental performance

36 5.1.3 DT-167CHGE Table 5.3 Item Specification Condition Temperature Operation 0 ºC to 40 ºC Storage -40 ºC to 85 ºC Humidity Operation 30

37 5.1.5 HA-A20BAT/DT-5025LBAT Table 5.5 Item Specification Condition Temperature Operation 0 ºC to 40 ºC Non-operation -5 ºC to 50 ºC When batt

38 5.1.6 DT-894CFU Table 5.6 Item Specification Condition Temperature Operation -20 ºC to 50 ºC Non-operation -20 ºC to 70 ºC Humidity Operati

39 5.2 Electrical Performances 5.2.1 DT-X11 Table 5.7 Item Specification Remark Power consumption DC2.5A/3.7 to 5.0V Anti-static strength Malfunc

4 Editorial Record Manual Version no. Date edited Page Content 0.90 February 2006 Tentative version 1.00 March 2006 Original version 8 The conte

40 5.2.4 DT-5022CHG Table 5.10 Item Specification Remark Anti-static strength Malfunction ±5 KV Destruction ±10 KV - ESD method: 250 pF, 100 ohm -

41 5.3 Mechanical Performances 5.3.1 DT-X11 Table 5.13 Item Specification Condition Resistance to drop impact(height) In bare condition 120 cm Ont

42 5.3.4 HA-A20BAT/DT-5025LBAT Table 5.16 Item Specification Condition Resistance to vibration 1 G - 10 to 55 Hz, In X,Y, and Z directions - Rec

43 5.4 Reliability 5.4.1 DT-X11 Table 5.18 Item Specification Remark/Condition Backlight 5,000 hours At half-life period Scanner module 10,000

44 5.4.3 DT-5022CHG Table 5.20 Item Specification Remark MTBF 210,000 hours or more MIL-HDBK217F Protection from short Internal circuit is prote

45 5.5 Compliance 5.5.1 DT-X11 Table 5.21 Category Standard DT-X11M30U DT-X11M10EDT-X11M30EDT-X11M10RC DT-X11M30RC RemarksUL1950 3rd Edition Yes No

46 6. Cable Specifications 6.1 For Chain Connection and Short Length Length; 1 meter or less Fig. 6.1 Table 6.1 Specifications of the cable

476.2 For Chain Connection and Long Length Length; 1 meter or longer Fig. 6.3 Pin layout diagram of cable for chain connection and long distan

48 7. Precautions 7.1 Handling Precautions for short-term storage (1 to 2 days period) • If the DT-X11 is to be stored over holidays (including Sat

49 7.2 Safety 7.2.1 Battery Pack/Memory Backup Battery Battery Pack • Never disassemble or retrofit the battery pack. The battery pack has safe

5 Preface This reference manual describes about the CASIO DT-X11 series handheld terminals with C-MOS imager or Laser Scanner integrated. A new gene

50 • The battery pack has a specific polarity. Do not force it into the DT-X11 when installing. Check the polarity. If the battery pack is connected

51 7.2.2 General • Avoid exposing it to water and foreign matter. Should foreign matter (metal chips, water, liquid chemicals) enter inside the DT-

6 1. Overview of the Products 1.1 Features Incorporates .NET technology • Uses WindowsCE 5.0 operating system. • Makes effective use of .NET reso

7 Aiming to a full compliance with the “Restriction of the use of certain Hazardous Substances in electronic equipment (RoHS)” set mandatory on July

8 1.2 Available Models Table 1.1 List of models Wireless Communication Memory Model Scan Engine Bluetooth IEE802.11bPC Cardslot RAM FROM DT-X11M10

9 1.2.1 Options and Interfaces Fig. 1.1 USB Port(Ver1 . 1 Function)PCIrDA Port(IrDA 1. 1)Bridge Satellite CradleDT-160IOEPower SupplyTerminals(Buil