Casio Projector XJ-M140/XJ-M145 User Manual download pdf (Page 12)

Returning to the Normal Input Mode from the 3D Input Mode

Press the [INPUT] key to display the input source selection screen.

Use the [T] and [S] keys to move the highlighting to “To normal input mode”

and then press the [ENTER] key.

z This enters the normal input mode and closes the input source selection screen.

Horizontal Flipping in the 3D Input Mode

In side-by-side 3D, a full frame consists of two halves on the left and right for each eye. In rare cases,

the left and right images may be reversed, which causes a loss of 3D depth. If this happens, try using

the following procedure to swap the left and right images with each other.

To swap the left and right images

In the 3D input mode, press the [ENTER] key.

You can perform the following operations while projecting an image.

z Image brightness adjustment

z Color mode selection

z Image zooming

z Momentarily blanking the image and muting the audio

z Image freeze

z Pointer display in the projected image

z Aspect ratio switching

Adjusting Image Brightness

Note

(for USB port model users)

Use the setup menu (page 20) to adjust image brightness when the input source is an external

device connected to the USB port.

Press the [BRIGHT] key.

z This displays the brightness adjustment window.

Use the [W] and [X] keys to adjust image brightness.

To hide the window, press the [ESC] key.

Image Operations During Projection

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 60 61

No comments

Casio Projector XJ-M140/XJ-M145 User Manual Page 12