Casio CTK-671 User Manual download pdf (Page 7)

CTK-671 MIDI Implementation

1.3.2 Omni Off

Format: BnH 7CH 00H

n: MIDI Channel Number

1.3.3 Omni On

Format: BnH 7DH 00H

n: MIDI Channel Number

1.3.4 Mono

Format: BnH 7EH 00H

n: MIDI Channel Number

1.3.5 Poly

Format: BnH 7FH 00H

n: MIDI Channel Number

Send: These messages are never sent.

Receive: Receipt of any of these messages releases (same as releasing the keyboard

key) the currently sounding voice.

1.4 Program Change

Format: CnH ppH

n: MIDI Channel Number

pp: Program Number

Send: When a tone is selected.

See the "Tone List" of the CTK-671 User's Guide for details.

Receive: Changes the tone and Part Mode (explained below) of the part corresponding

to the MIDI channel.

The selected tone is determined by the program value of this message and the

Bank Select message value received prior to this message.

See the "Tone List" in the CTK-671 User's Guide for information about actually

selecting tones, etc.

Also note that receipt of this message can also change the Part Mode parameter

at the same time. For details, see "About the Part Mode," which is located in the

section of this document named "3.2.3 Patch Part Parameter List."

1.5 Channel Aftertouch

Format: DnH vvH

n: MIDI Channel Number

vv: Value

Send: This message is never sent.

Receive: Receipt of this message adds vibrato to the voice that is sounding. Details of

the effect differ according to the tone setting.

1.6 Pitch Bend

Format: EnH llH mmH

n: MIDI Channel Number

ll: Value LSB

mm: Value MSB

Send: This message is never sent.

Receive: Receipt of this message changes the pitch of the currently sounding voice.

The range of the change depends on the Pitch Bend Sensitivity set by RPN.

1.7 Active Sensing

Format: FEH

Send: This message is never sent.

Receive: If some MIDI message is not received within a preset amount of time after this

message is received, all currently sounding CTK-671 voices are released and the

controller is reset.

1.8 System Exclusive

Format: F0H....F7H

1.8.1 Universal Realtime

Format: F0H 7FH....F7H

1.8.1.1 Master Volume

Format: F0H 7FH 7FH 04H 01H llH mmH F7H

mm: Value MSB

The setting value is the same as the value that is sent and received.

Send: This message is never sent.

Receive: Changes the Master Volume parameter.

Note that the Master Volume parameter cannot be changed on the CTK-671.

1.8.1.2 Master Balance

Format: F0H 7FH 7FH 04H 02H llH mmH F7H

mm: Value MSB

For information about the relationship between setting values and send/receive

values, see the "6.1.1.6 Pan Setting Value Table" in the section of this document

titled "6. Setting Values and Send/Receive Values."

Send: This message is never sent.

Receive: Changes the Master Pan parameter.

Note that the Master Pan parameter cannot be changed by a control panel

operation.

1.8.1.3 Master Fine Tuning

Format: F0H 7FH 7FH 04H 03H 00H mmH F7H

mm: Value MSB

For information about the relationship between setting values and send/receive

values, see the "6.1.1.7 -99 - 0 - 99 Setting Value Table" in the section of this document

titled "6. Setting Values and Send/Receive Values."

Send: When the Fine Tune parameter is changed.

Receive: Changes the Fine Tune parameter.

1.8.1.4 Master Coarse Tuning

Format: F0H 7FH 7FH 04H 04H llH mmH F7H

mm: Value MSB

For information about the relationship between setting values and send/receive

values, see the "6.1.1.4 -24 - 0 - 24 Setting Value Table" in the section of this document

titled "6. Setting Values and Send/Receive Values."

Send: When the Transpose parameter is changed.

Receive: Changes the Transpose parameter.

1.8.1.5 Reverb Parameter

Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H ppH vvH F7H

pp: Parameter

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Comments to this Manuals

No comments

Casio CTK-671 User Manual Page 7

Comments to this Manuals

Related products and manuals for Musical Instruments Casio CTK-671