Casio WK-1630 User Manual download pdf (Page 32)

E-30

733A-E-032A

Changing the Parameters of a Channel

Use the following procedure to change the parameters of each indi-

vidual channel.

PREPARATION

• Turn off the Synthesizer, Song Sequencer, or Pattern Sequencer if any

of them are turned on.

To change channel parameters

Press the MIXER SELECT button to select the Mixer

mode you want to use.

• Select the internal mode to make layer, split, Auto Accompa-

niment, or Song Sequencer settings.

• Select the External Mode to make MIDI settings.

• You can also make settings using the External/Solo or Exter-

nal/Play Modes, but we recommend using the External

Mode.

Use the [왗] and [왘] cursor keys to select the channel

whose parameters you want to change.

• See page E-28 for details on layer, split, Auto Accompani-

ment, and Song Sequencer channel assignments.

• The frame around the currently selected channel (the cur-

rent channel) flashes, to indicate that it is selected.

• The on/off status of the current channel is indicated in the

measure number area of the display (item 11 on page E-10).

On .........

Off .........

Change the current channel’s tone and volume pa-

rameters while a channel number frame is flashing, if

you want.

• Use the number keys or [+] and [–] keys to change the tone.

• Use [왖] and [왔] to change the volume. The current volume

setting is shown as a value in the metronome area of the dis-

play (item 15 on page E-10), and by the level indicator.

3-segment level

indicator shows

volume level of

each channel.

and

After making additional settings in step 4, press the

ENTER button.

• If you do not perform any operation for about five seconds

while a channel number frame is flashing, the display re-

turns to that in step 1 of the above procedure automatically.

❚

NOTES

❚

• Internal Mode and External Mode settings you make with the above

procedure are stored separately.

• You can change the parameters of a channel regardless of whether the

channel is on or off.

• Changing a Mixer internal mode channel setting causes the MIDI mes-

sage that corresponds to the change to be output through the MIDI OUT

terminal.

To make additional channel parameter settings

When making channel parameter settings, press the ENTER button

to display the first additional channel parameter screen.

Use the [왖] and [왔] cursor keys to scroll through the setting screens

shown below.

While any setting screen is on the display, use the number keys or [+]

and [–] to change the parameter to the value you want.

To make additional settings for the current channel,

press the ENTER button while a channel number frame

is flashing.

• See “To make additional channel parameter settings” for

details on making additional channel parameters.

000

∼

231

000

∼

127

000

∼

127

000

∼

127

–

∼

–

∼

000

∼

127

[

▲

][

▼

]

[

▲

][

▼

]

[

▲

][

▼

]

[

▲

][

▼

]

[

▲

][

▼

]

[

▲

][

▼

]

Pro

.No.

Vo l

ume

Pan

Ef f

ect 

Fin

eTune

C.T

une

ress

Parameter Screen Setting Range

Program Change Number

Volume

Pan

Effect

Send

Fine Tune

Coarse Tune

Expression

See the following section titled “Additional Channel Mode Parame-

ters” on page E-31 for details on what each of these parameters con-

trols.

❚

NOTES

❚

• The first screen is normally the pan screen. If you used the additional

channel parameter screens since turning on power, the last setting you

used appears first.

• You can use the [왗] and [왘] cursor keys to change the current channel

while an additional channel parameter screen is on the display.

• Channel 10 is reserved for drum sounds, so only tone number 192 to

199 can be selected.

Channel number frame

AMP ENVELOPE

00 FLAT

01-17 VIBRATO

18-45 OTHERS

DECAY

SUSTAIN

PITCH ENVELOPE

MIN

MAX

FULL RANGE

CHORD

CASIO CHORD

SONG

FINGERED

PATTERN

EXTERNAL

INTERNAL

UPPER1

CH 1

UPPER2

CH 2

LOWER1

CH 3

LOWER2

STOREBANK

CH 4

ACC VOL.

CH 5

CHORD1

CH 6

CHORD2

CH 7

CHORD3

CH 8

BASS

CH 9

RHYTHM

CH 10

TR1

CH 11

TR2

CH 12

TR3

CH 13

TR4

CH 14

TR5

CH 15

TR6

CH 16

789

456

PARAMETER RESET:

DELETE

/YESS/NO

MAIN MANU/

CHANNEL VOLUME:

SUB MANU/

CHANNEL SELECT:

MIXER SELECT

Number keys

[+]/[

–]

Cursor key

ENTER

WK-1800/1600(E)-28~31 03.7.31, 5:21 PMPage 30 Adobe PageMaker 6.5J/PPC

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 95 96

Comments to this Manuals

No comments

Casio WK-1630 User Manual Page 32

Comments to this Manuals

Related products and manuals for Musical Instruments Casio WK-1630