Casio CW-50 - Disc Title Printer Color Thermal Transfer User's Guide download pdf (Page 75)

Caring for the Printer

A dirty print head can make it impossible to obtain good printing results. Perform

the following steps to clean the print head when it becomes dirty.

Important!

• Use only a cotton swab or some other soft material to clean the print head.

• Note that you will not be able to open the disc tray or the front cover unless

the power cord, AC adaptor and USB cable are both connected to the printer.

Open the front cover before disconnecting cables. See page 21 for information

about opening the disc tray and front cover, and page 20 for information

about disconnecting cables.

1. Press the Eject button on the front of the printer or click the button on

the main window.

This causes the disc tray to come out part way.

2. Gently pull out the disc tray as far as it will go.

If there is a disc in the disc tray, remove it.

3. Open the front cover.

If there is an ink ribbon cassette loaded in the printer, remove it.

4. Unplug the USB cable from the PC and printer.

5. Unplug the power cord from the wall outlet, and then unplug the AC adaptor

from the printer.

Insert the tip of the cotton

swab and slide it lightly

back and forth along the

depression in the print

head.

6. Use a cotton swab moistened with alcohol to clean the print head.

You can use a commercially available cassette tape recorder head cleaning

kit to clean the print head.

Cleaning the Printer Exterior

Wipe the exterior of the printer with a cloth moistened with plain water.

Wring all excess liquid from the cloth before wiping the printer.

Never use benzene, alcohol, thinner, or other volatile agents to clean the

printer exterior. Doing so can damage the case.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80

No comments

Casio CW-50 - Disc Title Printer Color Thermal Transfer User's Guide Page 75