Casio MEP-U10 User Manual download pdf (Page 22)

User Maintenance

Printed label quality will suffer if the printer head and/or rubber roller become dirty. A

dirty tape cutter will result in poor cutting performance. Periodically perform the user

maintenance steps below to clean the printer head, rubber roller, and tape cutter.

Important!

Use a cotton swab or some other similar soft object to clean the printer head, rubber

roller, and tape cutter. Use of an ultra thin swab is recommended.

■ To clean printer components

1. Open the tape compartment cover.

• If there is tape loaded in the printer, remove it.

Important!

The printer head is hot during and immediately after printing. Be sure to allow enough

time for it to cool before removing the tape.

2. Moisten the swab with alcohol and then use

it to wipe the printer head, rubber roller, and

tape cutter surfaces. At this time, do not

directly touch the tape cutter. Touching the

cutter can cause ﬁ nger cuts.

Take particular care when wiping the contact

areas of the roller and printer head.

• You can also use a commercially available

cassette tape recorder head cleaning kit for

cleaning.

Cleaning the Exterior of the Printer

Moisten a soft cloth with water, completely wring out any excess, and then wipe

the exterior of the printer. Do not use benzene, alcohol, thinner, or any other volatile

agent, which can damage the printer.

Printer head

Tape cutter

Rubber roller

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

No comments

Casio MEP-U10 User Manual Page 22