Casio AQW101-1AV User Manual download pdf (Page 3)

Operation Guide 5056

Recalling Temperature Data

The measurements the watch takes at the top and the bottom of each hour are stored

in memory automatically. Memory can hold up to 50 measurement records. You can

use the Temperature Data Recall Mode to recall memory data when you need it.

• Each temperature data record has a number. The newest data record is number 01,

while the oldest data record is the one with the highest number.

• When there are already 50 records in memory, storage of a new temperature

reading causes the oldest record (record number 50) to be deleted automatically to

make room for the new data. The new data is assigned record number 1, and all of

the numbers of all the other records (01 to 49) are incremented by 1 (becoming 02

through 50).

To recall temperature records

1. In the Timekeeping Mode, press C twice to enter the

Temperature Data Recall Mode.

• This displays the newest record currently in memory.

2. Use D (+) to scroll through the records.

• Pressing D while the oldest record is displayed will

scroll to the newest record.

• If a temperature measurement operation is performed

while a record is displayed, the displayed record’s

number will be incremented by 1.

• If an error occurs during temperature measurement,

‘‘--.-’’ will be shown for the temperature value in the

corresponding record.

Temperature

Record number

Data storage time

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

• The display range of the stopwatch is 99 hours, 59

minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C.

1/100 second

Minutes

Seconds

Hours

To measure times with the stopwatch

Start Stop

Elapsed Time

➤

Re-start Clear

➤

Stop

➤

D ➤

Split Time

Start Split

➤

Split release Clear

➤

Stop

➤

Two Finishes

Start Split

➤

Stop Clear

➤

Split release

➤

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

(SPL displayed)

Countdown Timer

You can set the countdown timer within a range of one

minute to 100 hours. An alarm sounds when the

countdown reaches zero.

• You can also select auto-repeat, which automatically

restarts the countdown from the original value you set

whenever zero is reached.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

Seconds

Hours

Minutes

To use the countdown timer

Press D while in the Countdown Timer Mode to start the countdown timer.

• When the end of the countdown is reached and auto-repeat is turned off, the alarm

sounds for 10 seconds or until you stop it by pressing any button. The countdown

time is automatically reset to its starting value after the alarm stops.

• When auto-repeat is turned on, the countdown will restart automatically without

pausing when it reaches zero. The alarm sounds to signal when the countdown

reaches zero.

• The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

• To stop a countdown operation completely, first pause it (by pressing D), and then

press A. This returns the countdown time to its starting value.

To configure countdown start time and auto-repeat settings

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down A until the hour

setting of the countdown start time starts to flash, which

indicates the setting screen.

• If the countdown start time is not displayed, use the

procedure under “To use the countdown timer” to

display it.

2. Press C to move the flashing in the sequence shown

below, and select the setting you want to change.

Start Time

(Minutes)

Auto-Repeat

On/Off

Start Time

(Hours)

Auto-repeat on indicator

On/Off status

3. Perform the following operations, depending on which setting is currently selected

on the display.

• While the start time setting is flashing, use D (+) and B (–) to change it.

• Set 0:00 to specify 100 hours.

• While the auto-repeat on/off setting (0N or 0F) is flashing on the display, press

D to toggle auto-repeat on (0N) and off (0F).

4. Press A to exit the setting screen.

• The auto-repeat on indicator (

) is displayed on the Countdown Timer Mode

screen while this function is turned on.

• Frequent use of auto-repeat and the alarm can run down battery power.

Alarm

While the alarm is turned on, the watch beeps when the

alarm time is reached. You can also turn on an Hourly

Time Signal, which will cause the watch to beep twice

every hour on the hour.

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Hourly time signal

on indicator

Alarm on

indicator

Alarm time

(Hour : Minutes)

AM indicator

To set the alarm time

1. In the Alarm Mode, hold down A until the hour setting

of the alarm time starts to flash, which indicates the

setting screen.

• This operation turns on the alarm automatically.

2. Press C to move the flashing between the hour and

minute settings.

3. While a setting is flashing, use D (+) and B (–) to

change it.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (A indicator) or p.m. (P indicator).

4. Press A to exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for 10 seconds, regardless of the mode the watch is in.

• To stop the alarm tone after it starts to sound, press any button.

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn the Daily alarm and the Hourly Time Signal on and off

In the Alarm Mode, press D to cycle through the settings shown below.

• The alarm on indicator and the Hourly Time Signal on indicator are shown on the

display in all modes while these functions are turned on.

Alarm Off

Signal Off

Alarm On

Signal Off

Alarm Off

Signal On

Alarm On

Signal On

World Time

The World Time Mode digitally displays the current time in

50 cities (30 time zones) around the world.

• The times kept in the World Time Mode are

synchronized with the time being kept in the

Timekeeping Mode. If you feel that there is an error in

any World Time Mode time, check the UTC differential of

your Home Site Data (Home City) and the current

setting of the Timekeeping Mode time.

• Select a city code in the World Time Mode to display the

current time in any particular time zone around the

globe. See the “City Code List” for information about the

UTC differential settings that are supported.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

City code

Current time in

selected city

Day of week and day in

selected city

To view the time in another city

While in the World Time Mode, press D to scroll eastward through the city codes

(time zones).

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

(time zone) whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down A to toggle between Daylight Saving Time

(DST indicator displayed) and Standard Time (DST

indicator not displayed).

• The DST indicator is shown on the World Time screen

while Daylight Saving Time is turned on.

• Note that changing the Daylight Saving Time for any city

code causes the setting to be applied to all city codes.

DST indicator

Illumination

This watch has an EL (electro-luminescent) panel that

causes the entire display to glow for easy reading in the

dark.

• See “Illumination Precautions” for other important

information about using illumination.

To turn on illumination

In any mode (except when a setting screen is on the

display), press B to illuminate the display for about one

second.

1 2 3 4 5

Operation Guide 5056 1

Comments to this Manuals

No comments

Casio AQW101-1AV User Manual Page 3

Comments to this Manuals

Related products and manuals for Sport watches Casio AQW101-1AV