Casio DT-X7 Series User's Guide download pdf (Page 52)

E-50

1 USB Client Port This port is used to transmit data and ﬁ les (download, upload)

by connecting the Ethernet Cradle to a PC using a USB cable

(DT-380USB). The dedicated driver must be installed in the PC

before connecting the Ethernet Cradle to the PC.

2 USB Host Port This port is used to connect a corresponding USB peripheral

device.

3 Selector Switch This switch is used to switch between a USB connection and a

LAN connection.

4 LAN Connection

Status LED

This LED shows the status of the LAN connection.

Off: LAN cable not connected correctly.

Lit green: LAN cable connected correctly.

5 LAN

Communication

Status LED

This LED shows the LAN operation status.

Off: No communication.

Blinking green: Communication in progress.

6 LAN Port This port is used for connecting the cradle to a PC or hub via a

LAN cable so that data and ﬁ les can be transmitted (uploaded or

downloaded).

The special driver software must be installed in the DT-X7.

7 AC Adaptor Jack Connect the AC adaptor here.

8 Terminal Detect

Switch

This switch detects when the DT-X7 is seated correctly on the

Ethernet Cradle.

9 Power Contacts Power is supplied to the DT-X7 via these contacts.

10 Communication

Terminal

Used for communications.

11 Power LED This LED indicates the power status and the mounting status of

the DT-X7.

Off: DT-X7 is not installed. Or, the AC adaptor is not connected.

Green: Power on, DT-X7 mounted correctly.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 74 75

No comments

Casio DT-X7 Series User's Guide Page 52