Casio Watch 3061 User Manual download pdf (Page 5)

Operation Guide 3050 3061

Exposure Level (Brightness)

Outdoor Sunlight (50,000 lux)

Sunlight Through a Window (10,000 lux)

Daylight Through a Window on a Cloudy Day

(5,000 lux)

Indoor Fluorescent Lighting (500 lux)

Approximate Exposure Time

5 minutes

24 minutes

48 minutes

8 hours

• Since these are the specs, we can include all the technical details.

• Display on 18 hours per day, sleep state 6 hours per day

• 1 illumination operation (1.5 seconds) per day

• 10 seconds of alarm operation per day

• 10 minutes of signal reception per day

• Stable operation is promoted by frequent exposure to light.

Charging Guide

After a full charge, timekeeping remains enabled for up to about 9 months.

• The following table shows the amount of time the watch needs to be exposed to light

each day in order to generate enough power for normal daily operations.

Recovery Times

The table below shows the amount exposure that is required to take the battery from

one level to the next.

• The above exposure time values are all for reference only. Actual required exposure

times depend on lighting conditions.

7 hours

35 hours

71 hours

Exposure Level

(Brightness)

Outdoor Sunlight

(50,000 lux)

Sunlight Through a Window

(10,000 lux)

Daylight Through a Window

on a Cloudy Day (5,000 lux)

Indoor Fluorescent Lighting

(500 lux)

Approximate Exposure Time

Level 5 Level 4 Level 3 Level 2 Level 1

2 hours

6 hours

11 hours

120 hours

25 hours

126 hours

256 hours

▲

– – –

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• When setting the time, you can also configure settings for the 12/24-hour format,

and power saving on/off, and you can specify the screens that are displayed in the

Timekeeping Mode.

• In the Timekeeping Mode, you can press B to toggle the display contents as shown

below.

Date

Month – Day

Hour : Minutes

PM indicator

▲

Press B.

▲

Press B.

▲

Day of week

Day of weekHour : Minutes Seconds

Day of the Week

Module 3050 (A)

Module 3061

Month – Day

PM indicator

• Pressing D in the Timekeeping Mode will display the Last Signal screen.

▲

Press D.

▲

Module 3050 (A)

Module 3061

▲

Press D.

▲

Setting the Time and Date

Make sure you select your Home City code before you change the current time and

date settings. World Time Mode times are all displayed in accordance with the

Timekeeping Mode settings. Because of this, World Time Mode times will not be

correct if you do not select the proper Home City code before setting the time and

date in the Timekeeping Mode.

To set the time and date

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Press C to change the flashing contents in the

sequence shown below to select other settings.

City code

Seconds

Hour

Minutes

12/24-Hour

Format

Month Year

DST

Day

Power

Saving

City Code

3. When the setting you want to change is flashing, use B and/or D to change it as

described below.

Screen: To do this:

Change the city code

Cycle between auto DST ( ),

Standard Time (

), and

Daylight Saving Time ( )

Toggle between 12-hour (

12H) and

24-hour (

24H) timekeeping

Do this:

Use D (east) and B (west).

Press D.

TYO

• See “City Code Table” for a complete list of available city codes.

Reset the seconds to

Change the hour or minutes

Change the year, month, or day

Toggle Power Saving on ( ) and

off (

)

Press D.

Use D (+) and B (–).

Press D.

• Auto DST ( ) can be selected only while LIS, LON, MAD, PAR, ROM, BER,

STO, ATH , MOW, HKG, BJS, TPE, SEL, TYO, HNL, ANC, YVR, LAX, YEA, DEN,

MEX, YWG, CHI, MIA, YTO, NYC, YHZ, or YYT is selected as the Home City

code. For more information, see “Daylight Saving Time (DST)” below.

• For information about settings other than the time and date, see the following.

Power Saving: Power Saving Function

4. Press A to exit the setting screen.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

The time calibration signals transmitted from Mainflingen (Germany), Rugby

(England), or Fort Collins (the United States) include both Standard Time and DST

data. When the Auto DST setting is turned on, the watch switches between Standard

Time and DST (summer time) automatically in accordance with the signals.

• The time calibration signals transmitted from Fukushima and Fukuoka/Saga (Japan)

do not include summer time data.

• The default DST setting is Auto DST (

) whenever you select LIS, LON, MAD,

PAR, ROM, BER, STO, ATH , MOW, HKG, BJS, TPE, SEL, TYO, HNL, ANC, YVR,

LAX, YEA, DEN, MEX, YWG, CHI, MIA, YTO, NYC, YHZ, or YYT as your Home City

code.

• If you experience problems receiving the time calibration signal in your area, it

probably is best to switch between Standard Time and Daylight Saving Time

(summer time) manually.

To change the Daylight Saving Time (summer time) setting

1. In the Timekeeping Mode, hold down A until the city code starts to flash, which

indicates the setting screen.

2. Press C and the DST setting screen appears.

3. Use D to cycle through the DST settings in the sequence shown below.

Auto DST ( ) DST off ( ) DST on ( )

4. When the setting you want is selected, press A to exit the setting screen.

• The DST indicator appears to indicate that Daylight Saving Time is turned on.

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Button Operation Tone

The button operation tone sounds any time you press one

of the watch’s buttons. You can turn the button operation

tone on or off as desired.

• Even if you turn off the button operation tone, the alarm,

Hourly Time Signal, and Countdown Timer Mode alarm

all operate normally.

To turn the button operation tone on and off

In any mode (except when a setting screen is on the

display), hold down C to toggle the button operation tone

on (MUTE indicator not displayed) and off (MUTE

indicator displayed).

MUTE indicator

Module 3050 (A)

Module 3061

• Since the C button is also the mode change button, holding it down to turn the

button operation tone on or off also causes the watch’s current mode to change.

• The MUTE indicator is displayed in all modes when the button operation tone is

turned off.

Power Saving Function

When turned on, the Power Saving function enters a sleep

state automatically whenever the watch is left in an area

where it is dark for a certain period. The table below

shows how watch functions are affected by the Power

Saving function.

Power saving indicator

Module 3050 (A)

Module 3061

1 2 3 4 5 6

Operation Guide 3050 3061 1

Comments to this Manuals

No comments

Casio Watch 3061 User Manual Page 5

Comments to this Manuals

Related products and manuals for Watches Casio Watch 3061