Casio EX-ZR100 Owner's Manual download pdf (Page 149)

149

Using the Camera with a Computer

4. Turn off the camera and then use the USB cable that comes with the

camera to connect it to your Macintosh.

• The camera does not draw power over the USB cable. Check the battery level

before connecting and make sure it is not too low.

• Make sure that you insert the cable connector into the USB/AV port until you

feel it click securely into place. Failure to insert the connector fully can result in

poor communication or malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as

shown in the illustration.

• When connecting the USB cable to a USB port, make

sure you align the connector correctly with the port.

• Your computer may not be able to recognize the camera

if you connect via a USB hub. Always connect directly to

the computer’s USB port.

5. Turn on the camera.

The camera’s back lamp will light green at this time. In this mode, your Macintosh

recognizes the memory card loaded in the camera (or the camera’s built-in

memory if it does not have a memory card loaded) as a drive. The appearance of

the drive icon depends on the Mac OS version you are using.

6. Double-click the camera’s drive icon.

7. Drag the “DCIM” folder to the folder to which you want to copy it.

USB port

USB cable (included with camera)

Making sure that the 6 mark on the camera is

aligned with the 4 mark of the USB cable

connector, connect the cable to the camera.

[USB/AV] port

Large connector

Small connector

Terminal cover

1 ... 148 149 150 ... 205

No comments

Casio EX-ZR100 Owner's Manual Page 149