Casio EX-FC500S Owner's Manual download pdf (Page 129)

129

Viewing Snapshots and Movies

NOTE

• Use a HDMI cable that with a plug that is compatible with the camera’s HDMI micro

connector on one end, and a plug that is compatible with your TV’s HDMI

connector on the other end.

• Proper image and/or audio output and other operations may not be possible with

some devices.

• Connecting the camera to the HDMI connector of another device can damage both

the camera and the other device. Never connect two HDMI output connectors to

each other.

• Disconnect the HDMI cable when you are not using HDMI output. The camera’s

monitor screen may not operate normally while the HDMI cable is connected.

. Selecting the HDMI Terminal Output Method (HDMI Output)

Procedure

[MENU] * “¥ SETTING” Tab * HDMI Output

Use this setting to select the digital signal format when connecting to a TV with an

HDMI cable.

* 1080i corresponds to 1080 60i, but not 1080 50i. Because of this, the required

output method may be 576p when outputting to a digital TV in a PAL reception area

that does not support 1080i 60i. If you are in a PAL reception area and nothing is

displayed automatically, change the setting to 576p.

• If an image does not appear when “Auto” is selected as the output method, try

changing this setting to something else.

IMPORTANT!

• The “HDMI Output” setting cannot be changed as long as there is an HDMI cable

connection between the camera and a TV. Disconnect the HDMI cable from the

camera to change the “HDMI Output” setting.

Auto

This setting will cause the format to change automatically in accordance

with the connected TV. Normally, you should use this mode.

1080i 1080i format output*

480p 480p format output

576p 576p format output

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 247 248

No comments

Casio EX-FC500S Owner's Manual Page 129