Casio EXILIM EX-ZR200 User Manual download pdf (Page 54)

Snapshot Tutorial

• You can specify 5, 10, 20, or 30 as the maximum number of shots for each

continuous shutter operation.

• You can specify anywhere from 1 second up to 10 seconds as the continuous

shutter shooting time, which is the amount of time of the pre-record buffer plus the

amount of time that continuous shutter recording is performed after the shutter

button is pressed all the way. The maximum shooting time depends on the

selected CS speed. You can select a CS speed in the range of 3 to 30 fps.

• You can configure the mode so up to 25 images are pre-recorded to the buffer until

you fully press the shutter button.

• The minimum number of pre-recorded buffer images you can specify is three. Total

recording time depends on the current continuous shutter frames-per-second (fps)

setting.

• Specifying zero for the number of pre-recorded images disables Prerecord CS and

performs High Speed CS only (without pre-recording). Note that the mechanical

shutter is used when shooting with High Speed CS.

. Getting Ready

1. Set the mode dial to t (Auto).

2. Press Õ (Continuous Shutter).

• This will display Š (High Speed CS). If this does

not happen, press Õ again.

3. Press [SET].

4. Use [8] and [2] to select the fourth control

panel option from the bottom (High Speed CS fps).

5. Use [4] and [6] to select the continuous shutter

(CS) speed you want.

6. Use [8] and [2] to select the third control panel

option from the bottom (Max CS shots).

7. Use [4] and [6] to select the maximum number of shots for each

continuous shutter operation.

30 images per second

(30 fps)

You can shoot up to 30 images in 1 second.

3 images per second

(3 fps)

You can shoot up to 10 images over 30 seconds.

3 to 30 fps

Enables specification of the number of CS images recorded per

second.

High Speed CS icon

CS speed

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 200 201

No comments

Casio EXILIM EX-ZR200 User Manual Page 54