Casio EXILIM K1190PCM2DMX User's Guide download pdf (Page 90)

Using the Camera with a Computer

4. Turn off the camera and

then use the USB cable

that comes with the

camera to connect it to

your Macintosh.

• The camera does not

draw power over the USB

cable. Make sure the

camera’s battery is

sufficiently charged

before connecting.

• Make sure that you insert

the cable connector into

the USB/AV port until you

feel it click securely into

place. Failure to insert the

connector fully can result

in poor communication or

malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as

shown in the illustration.

• When connecting the USB cable to a USB port, make

sure you align the connector correctly with the port.

5. Turn on the camera.

The camera’s back lamp will light green at this time. In this mode, your Macintosh

recognizes the memory card loaded in the camera (or the camera’s built-in

memory if it does not have a memory card loaded) as a drive. The appearance of

the drive icon depends on the Mac OS version you are using.

6. Double-click the camera’s drive icon.

7. Drag the “DCIM” folder to the folder to which you want to copy it.

8. After the copy operation is complete, drag the drive icon to Trash.

9. On the camera, press [ON/OFF] to turn off the camera. After making

sure that the green back lamp is unlit, disconnect the camera from the

computer.

USB port

USB cable

Making sure that the 6 mark on the camera is

aligned with the 4 mark of the USB cable

connector, connect the cable to the camera.

USB/AV port

Large connector

Small connector

1 ... 89 90 91 ... 139

Comments to this Manuals

No comments

Casio EXILIM K1190PCM2DMX User's Guide Page 90

Comments to this Manuals

Related products and manuals for Bridge cameras Casio EXILIM K1190PCM2DMX