Casio EX-Z80 Owner's Manual download pdf (Page 78)

Viewing Snapshots and Movies

1. Use the AV cable that comes with the camera to connect it to the TV.

• Make sure that you insert the cable connector into the USB/AV port until you

feel it click securely into place. Failure to insert the connector fully can result in

poor communication or malfunction.

• Note that even while the connector is fully inserted, you still

will be able to see the metal part of the connector as shown

in the illustration.

2. Turn on the TV and select its video input mode.

If the TV has more than one video input, select the one where the camera is

connected.

3. Press [p] (PLAY) to turn on the camera.

This will cause an image to appear on the TV screen, without anything appearing

on the camera’s monitor screen.

• Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV

cable is connected.

• You also can change the aspect ratio of the screen and the video output

system (page 129).

4. Now you can display images and play back movies as you normally do.

Viewing Snapshots and Movies on a TV Screen

Yellow

AV cable (bundled)

USB/AV port

White

Making sure that the 6 mark on the camera is aligned with the 4 mark

of the AV cable connector, connect the cable to the camera.

AudioVideo

VIDEO IN jack (yellow)

AUDIO IN jacks (white)

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 164 165

No comments

Casio EX-Z80 Owner's Manual Page 78