Casio EX-Z7 User Manual download pdf (Page 237)

APPENDIX

237

■ If the camera does not work normally

This can mean there is a problem with how the battery is

loaded. Perform the following steps.

Remove the battery from the camera and

check the battery contacts for dirt. If the

contacts are dirty, wipe them clean with a dry

cloth.

Check to make sure that the AC adaptor’s

power cord is connected securely to the

power outlet and USB cradle.

• If the same symptoms occur again when you place

the camera on the USB cradle after taking the above

steps, contact a CASIO authorized service center.

• The [CHARGE] lamp may remain amber colored and

the charge operation may not start right away if you

try to charge immediately after using the camera

(which causes battery to become warm) or when it is

too hot or too cold where you are performing the

charge operation. If this happens, simply wait until

the battery reaches normal temperature. The

[CHARGE] lamp will turn red and charging will start

when the battery temperature returns to the

allowable charging temperature range.

• If the [CHARGE] lamp starts flashing red, it means

that an error occurs while charging. An error can be

caused by any of the following: a problem with the

USB cradle, a problem with the camera, or a problem

with the battery or how it is loaded. Remove the

camera from the USB cradle and see if it works

normally.

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 252 253

No comments

Casio EX-Z7 User Manual Page 237