Casio EX-FC200S User Manual download pdf (Page 148)

148

Using the Camera with a Computer

IMPORTANT!

• The camera does not support operation with Mac OS X 10.0. Operation is

supported with Mac OS 10.1, 10.2, 10.3, 10.4, 10.5, and 10.6 (using the OS

standard USB driver) only.

. To connect the camera to your computer and save files

1. Turn on the camera and press [MENU].

2. On the “Set Up” tab, select “USB” and then press [6].

3. Use [8] and [2] to select “Mass Storage”, and then press [SET].

4. Turn off the camera and then use the USB cable that comes with the

camera to connect it to your Macintosh.

The camera will turn on automatically and battery charging will start (page 19).

• The camera may not turn on automatically in the case of certain computer

models or connection conditions. If this happens, press [ON/OFF] (Power) to

turn on the camera.

• Make sure that you insert the cable connector into the USB/AV port until you

feel it click securely into place. Failure to insert the connector fully can result in

poor communication or malfunction.

Connecting the Camera to Your Computer and Saving Files

USB port

Making sure that the 6 mark on the camera is aligned

with the 4 mark of the USB cable connector, connect

the cable to the camera.

[USB/AV] port

Large connector

Small connector

Terminal

cover

USB cable (included with camera)

1 ... 147 148 149 ... 195

No comments

Casio EX-FC200S User Manual Page 148