Casio EX-Z18 User Manual download pdf (Page 103)

103

USING BEST SHOT

■ Turning on Anti Shake Using the Panel

(Operation Panel)

1. In the REC mode, press [SET].

2. Use [S] and [T] to select the fourth option

from the top in the operation panel (Anti

Shake).

3. Use [W] and [X] to select “Auto” and then

press [SET].

• This turns on Anti Shake and displays “ ” on the

monitor screen.

• In this case, Anti Shake will remain on until you turn it off

on the Panel.

IMPORTANT!

• Anti Shake will not work unless the ISO setting (page 129)

is set to “Auto”.

• Though “ ” (Anti Shake) is displayed on the monitor

screen following an automatic flash operation using the

“Auto Flash” or “Red Eye Reduction” setting, or while the

flash setting is “Flash On” or “Soft Flash”, Anti Shake is

disabled.

• Shooting with Anti Shake can cause an image to appear

somewhat coarser than normal and can cause slight

deterioration of image resolution.

• Anti Shake may not be able to eliminate the effects of hand

or subject movement when movement is severe.

• You can also use Anti Shake to reduce the effects of hand

movement only while recording a movie. The effects of

subject movement are not limited (page 92).

• Anti Shake may not work with a very low shutter speed. If

this happens, use a tripod to stabilize the camera.

• The camera sometimes performs an automatic noise

reduction operation to reduce digital noise in images

recorded under certain lighting conditions. This operation

causes the camera to take longer than normal to store the

image and be ready for the next shot.

1 ... 102 103 104 ... 265

No comments

Casio EX-Z18 User Manual Page 103