Casio EXILIM EX-FH20 User Manual download pdf (Page 144)

144

Appendix

. Condensation

Sudden and extreme temperature changes, such as when the camera is moved from

the outdoors on a cold winter day into a warm room, can cause water droplets called

“condensation” to form on the interior and the exterior of the camera, which creates

the risk of malfunction. To prevent condensation from forming seal the camera in a

plastic bag before changing locations. Then leave the bag sealed to allow the air

inside to naturally change to the same temperature as the air in the new location.

After that, remove the camera from the bag and open the battery cover for a few

hours.

. Lens

• Never apply too much force when cleaning the surface of the lens. Doing so can

scratch the lens surface and cause malfunction.

• You may sometimes notice some distortion in certain types of images, such as a

slight bend in lines that should be straight. This is due to the characteristics of

lenses, and does not indicate malfunction of the camera.

. Caring for your camera

• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and

other foreign matter on the lens or flash window can interfere with proper operation

of the camera. Use a blower or other means to keep the lens and flash window free

of dirt and dust, and wipe gently with a soft, dry cloth.

• To clean the camera, wipe it with a soft, dry cloth.

. Old Battery Handling Precautions

• Insulate the positive and negative terminals with tape, etc.

• Do not peel the covering off of the battery.

• Do not try to take the battery apart.

. Other Precautions

The camera becomes slightly warm during use. This is normal and does not indicate

malfunction.

1 ... 143 144 145 ... 176

No comments

Casio EXILIM EX-FH20 User Manual Page 144