Casio EXILIM K1100PCM1DMX User Manual download pdf (Page 131)

131

Other Settings (Set Up)

Procedure

[MENU] * Set Up Tab * USB

You can use the procedure below to select the USB communication protocol, which is

used when exchanging data with a computer, printer, or other external device.

Procedure

[MENU] * Set Up Tab * Video Out

You can use the procedure in this section to select either NTSC or PAL as the video

output system. You can also specify an aspect ratio of 4:3 or 16:9.

• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.

Images will not display correctly if you select the wrong aspect ratio.

• Images will not display correctly unless the camera’s video signal output setting

matches the video signal system of the TV or other video equipment.

• Images cannot be displayed correctly on a TV or video equipment that is not NTSC

or PAL.

Configuring USB Protocol Settings (USB)

Mass

Storage

Select this setting when connecting to a computer or other device

that supports USB DIRECT-PRINT (page 93). With this setting, the

computer sees the camera as an external storage device. Use this

setting for normal transfer of images from the camera to a computer

(using the bundled Photo Loader with HOT ALBUM application).

PTP

(PictBridge)

Select this setting when connecting to a printer that supports

PictBridge (page 93). This setting simplifies the transfer of image

data to the connected device.

Selecting the Screen Aspect Ratio and Video Output System

(Video Out)

NTSC Video system used in Japan, the U.S., and other countries

PAL Video system used in Europe and other areas

4:3 Normal TV screen aspect ratio

16:9 Wide screen aspect ratio

1 ... 130 131 132 ... 167

No comments

Casio EXILIM K1100PCM1DMX User Manual Page 131