Casio PX-330 User Manual

1Part I MIDI Message Overview1 Product Configuration as a MIDI Device...

109.1 Bank Select (00H)FormatSendSent when a tone is selected.For information about numbers, see the Tone List in the User’s Guide.ReceiveReceipt swit

119.4 Data Entry (06H, 26H)FormatSendSent when there is a change in the parameters assigned to NRPN and RPN.For details about information assigned to

129.7 Expression (0BH)FormatSendSent in the following cases.• When Accomp MIDI Out is onReceiveReceipt changes the Expression value.9.8 General Use Co

139.9 Hold1 (40H)FormatSendSent in the following cases.• When a pedal that has a sustain (damper) function is operated• When Accomp MIDI Out is onRece

149.11 Sostenuto (42H)FormatNote 1:For information about the relationship between setting values and send/receive values, see the “26.1 Off/On Setting

159.14 Vibrato Depth (4DH)FormatNote 1:For information about the relationship between setting values and send/receive values, see “26.4 –64 - 0 - +63

169.17 Reverb Send (5BH)FormatSendSent when a GM tone is selected.ReceiveReceipt changes Reverb Send.9.18 Chorus Send (5DH)FormatSendThis message is s

179.20 RPN (64H, 65H)FormatThe following are the parameters assigned to RPN by this Instrument.9.20.1 Pitch Bend SensitivityFormatSendSent when the pi

189.20.4 Modulation DepthFormatSendThis message is never sent.ReceiveReceipt changes the Vibrato Modulation Depth for the tone that is currently selec

1910 Mode Messages10.1 All Notes Off (7BH)FormatSendSent in the following cases.• When the keyboard channel is changed• When a recorder function is us

29.16 Portamento Control (54H) ... 159.1

2010.4 Mono (7EH)FormatSendThis message is never sent.ReceiveReceipt of this message stops the currently sounding voice.10.5 Poly (7FH)FormatSendThis

2111.1 About Timbre TypeThe tone selected by each part of this Instrument has a “Timbre Type” parameter that specifies the type of sound source for th

2212 Channel AftertouchFormatSendThis message is not sent by this Instrument.ReceiveReceipt of this message adds modulation to the voice that is sound

23Part IIISystem Messages14 Active SensingFormatSendThis message is never sent.ReceiveOnce this message is received, the Active Sensing mode is entere

2415.1.2 Master BalanceFormatNote 1:For information about the relationship between setting values and send/receive values, see “26.5 Pan Setting Value

2515.1.5 Reverb ParameterFormatType FormatNote 1:For information about the relationship between setting values and send/receive values, see “26.7 Reve

26SendThis message is sent when the System Chorus Type setting is changed.ReceiveReceipt changes the System Chorus Type parameter.Rate FormatSendThis

2715.1.7 GM System MessageGM System On FormatSendThis message is never sent.ReceiveReceipt puts the sound source into a GM sound source mode. Also, th

28Part IVInstrument-Specific System Exclusive Messages16 FormatThis section explains the format of the Instrument-specific System Exclusive Messages.

2916.3 Field Formats16.3.1 SX : System Exclusive Message StatusThis is the System Exclusive Message status byte established by the MIDI standard.16.3.

3Part IV Instrument-Specific System Exclusive Messages16 Format ...

3016.3.6 cat : Category0cccccccB = Category (7bit)The category indicates the categories of data handled by the System Exclusive Message. The ID numbe

31Block Bit Field Division• Case 1When an array has three or fewer nesting levels and the number of arrays in each dimension is 128 or less, they are

3216.3.13 data : Parameter DataParameter data indicates the parameter value.The data array size is len + 1. For a one data item structure, the length

3317 Parameter TransferThere are two parameter operations: Individual Parameter Transfer and Individual Parameter Request.A single session is conclude

34Part VParameter ListHow to Read the TablesNumber Base Notation“Size” indicates the parameter value bit width as a decimal value.The bit field positi

3520 Patch ParametersThe main function of patch parameters is to configure the settings of the sound source of a device.20.1 Master Tune ParametersThe

3620.4 System Reverb ParametersNote 1:Selects the System Reverb preset type. Receipt of GM/GS Reset selects Hall2. This is the value of this Type is a

3720.7 Part Parameters21 Tone Parameters21.1 Basic ParametersNote 1:When a tone is selected whose Sys Fx Send Override parameter setting is “Yes”, the

3821.2 LFO ParametersNote 1:The function of this parameter is to relatively change the original setting value of the tone. The parameter is set to the

3921.3 DSP ParametersNote 1:This value is the DSP algorithm ID, which cannot be changed directly at the user level. Changing the DSP Type or Tone Numb

422 Music Library Parameters ... 39Part VI

40Part VIDSP Parameter List23 Tone with DSP ListThis is a list of tones that use DSP.Tone Name Display Mono/Stereo DSP AlgorithmGRAND PIANO MODERN GrP

4124 DSP Algorithm ID TablesThe lists in this section show the DSP algorithms that are built into the Instrument.24.1 Monaural Tone DSP24.2 Stereo Ton

42Note 1: See “26.9 Equalizer Mid Frequency Setting Value Table”.Note 2: See “26.12 DSP Equalizer Gain Setting Value Table”.25.3 Wide 3Band EQNote 1:

4325.7 RotaryNote 1: See “26.2 Slow/Fast Setting Value Table”.Note 2: See “26.3 Rotate/Brake Setting Value Table”.25.8 Drive RotaryNote 1: See “26.2 S

44Part VIISetting Values and Send/Receive Values26 Setting Value Tables26.1 Off/On Setting Value Table26.2 Slow/Fast Setting Value Table26.3 Rotate/Br

4526.8 Chorus Type Setting Value Table26.9 Equalizer Mid Frequency Setting Value Table26.10 Wide Band Equalizer Mid Frequency Setting Value TableTrans

4626.11 Brilliance Gain Setting Value TableNote:The gain value does not exactly correspond to decibels (dB).26.12 DSP Equalizer Gain Setting Value Tab

47Part VIIIMIDI Implementation Notation27 Value Notation27.1 Hexadecimal NotationMIDI implementation sometimes requires that data be expressed in hexa

CASIO COMPUTER CO.,LTD.6-2, Hon-machi 1-chomeShibuya-ku, Tokyo 151-8543, JapanMA0910-A

5Part IMIDI Message Overview1 Product Configuration as a MIDI DeviceAs a MIDI device, the instrument consists of the System Section, Sound Generator S

61.2.2 PartsThe settings of the sound generator parts can be changed using Instrument-specific system exclusive messages.This Instrument consists of 4

7Note 1:Can be changed by the Keyboard Channel setting.Note 2:Sent during recorder play only.When there is no data recorded in the applicable recorder

8Part IIChannel Message4 Send ChannelFor information about the MIDI channels of the channel messages that are sent when this Instrument is played, see

97Note OnFormatSendSent when a key is pressed.ReceiveRecognized as key press information.8 Polyphonic Key PressureFormatSendThis message is not sent b