Casio Privia PX-3 User's Guide download pdf (Page 31)

English

Editing Zone Parameters

E-29

To change zone parameter settings

Check to make sure that the lamp above the



(MASTER CONTROL) button is lit.

• If it is unlit, press the



(MASTER CONTROL)

button to light it.

Hold down the



(ZONE EDIT) button until

the zone menu screen shown below appears.

• This will cause the



(ZONE EDIT) button lamp to

light.

Use the



(ZONE EDIT) button to display the

zone menu page that contains the parameter

whose setting you want to change.

Example: Zone menu page 2

• Each press of the



(ZONE EDIT) button advances

to the next page.

Press the PARAMETER SELECTOR button

(



(A) through



(D)) to select the

parameter whose setting you want to change.

• The brackets around the setting of parameter you

select will change from [ ] to %. This indicates that

editing of the setting is enabled.

Example: After the



• Holding down one of the PARAMETER SELECTOR

buttons will display its full name. For example,

“MidCh” will change to “MIDI Out Ch”.

Press the button that corresponds to the zone

whose settings you want to change:



(UPPER 1) button,



(UPPER 2) button,



(LOWER 1) button,



(LOWER 2) button.

• The lamp of the button you press will light, which

indicates its zone is selected.

Use the



(EDIT w, q) buttons to change

the setting.

• Pressing w and q at the same time returns the

setting to its initial default.

• Holding down w or q will scroll through the

settings at high speed.

• For details about the meaning and range of each

parameter setting, see “Zone Parameter Settings”

(page E-30).

If you want to change the setting of the same

parameter in other zones, perform steps 5

and 6 again.

If you want to change the setting of another

parameter, perform steps 3 through 7 again

as required.

After all of the zone parameters are the way

you want, hold down the



(ZONE EDIT)

button until the button lamp goes out.

• This will return the menu along the bottom of the

display to the common menu.

IMPORTANT!

Turning off the Digital Piano causes all zone

parameters to return to their initial default settings. If

you need to save a zone parameter setup, perform one

of the operations described below.

• If you want to restore the current setup the next time

you turn on the Digital Piano, perform the backup

operation. For details, see “Backup” (page E-40).

• If you don’t need to restore the current setup the next

time you turn on the Digital Piano but want to have it

on hand for recall when you need it, save the setup

to registration memory. For details, see “Using

Registration Memory” (page E-34).

Lit

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 69 70

Comments to this Manuals

No comments

Casio Privia PX-3 User's Guide Page 31

Comments to this Manuals

Related products and manuals for Digital pianos Casio Privia PX-3