Casio WK1630 User Manual download pdf (Page 14)

E-12

733A-E-014A

Connections

•

WK-1800

Phones and Line Out Terminals

Before connecting phones or other external equipment, be sure to first

turn down the volume settings of the keyboard and the connected

equipment. You can then adjust volume to the desired level after con-

nections are complete.

[Front]

Connecting Phones (Figure

Connecting phones cuts off output from the keyboard’s built-in speak-

ers, so you can play even late at night without disturbing anyone.

[Rear Panel]

Connecting to Audio Equipment

Use commercially available cords to connect to the two jacks as shown

in Figure 2. It is up to you to purchase connecting cables like the

ones shown in the illustration for connection. Normally in this

configuration, you must set the audio equipment’s input selector to

the setting that specifies the terminal (such as AUX IN) that the key-

board is connected to. Use the keyboard’s VOLUME slider to adjust

the volume level.

Connecting to a Musical Instrument Amplifier

Use commercially available cords to connect to the two jacks as shown

in Figure 3. It is up to you to purchase connecting cables like the

ones shown in the illustration for connection. Use the keyboard’s VOL-

UME slider to adjust the volume level.

• If your amplifier has only one input jack, use an adapter like the

one shown below.

•

WK-1600/1630

Phones/Output Terminal

Before connecting phones or other external equipment, be sure to first

turn down the volume settings of the keyboard and the connected

equipment. You can then adjust volume to the desired level after con-

nections are complete.

[Front]

Connecting Phones (Figure

Connecting phones cuts off output from the keyboard’s built-in speak-

ers, so you can play even late at night without disturbing anyone.

Audio Equipment (Figure

Connect the keyboard to a audio equipment using a commercially

available connecting cord with a standard plug on one end and two

PIN plugs on the other end. Note that the standard plug you connect

to the keyboard must be a stereo plug, otherwise you will be able to

output only one of stereo channels. In this configuration, you nor-

mally set the input selector of the audio equipment to the terminal

(usually marked AUX IN or something similar) where the cord from

the keyboard is connected. See the user documentation that comes

with your audio equipment for full details.

Musical Instrument Amplifier (Figure

Use a commercially available connecting cord to connect the keyboard

to a musical instrument amplifier.

❚

NOTE

❚

Be sure to use a connecting cord that has a stereo standard plug on the

end you connect to the keyboard, and a connector that provides dual chan-

nel (left and right) input to the amplifier to which you are connecting. The

wrong type of connector at either end can cause one of the stereo chan-

nels to be lost.

When connected to a musical instrument amplifier, set the volume of

the keyboard to a relatively low level and make output volume ad-

justments using the amplifier’s controls.

LEFT

RIGHT

AUX IN or similar terminal

of audio amplifier

White

Red

PIN plug

Stereo standard plug

PHONES/OUTPUT Terminal

Keyboard amp,

guitar amp, etc.

PHONES Terminal

Stereo standard plug

❚

NOTE

❚

You can also connect the keyboard’s MIDI terminal to a computer or se-

quencer. See “MIDI” on page E-60 for details.

Standard plug

Standard jack

OUT IN

SUSTAIN/

ASSIGNABLE JACK

MIDI

LINE OUT

R L/MONO

DC 12V

Standard plugs

Guitar amplifier,

keyboard amplifier, etc.

Audio amplifier AUX IN, etc.

PIN plug

Standard jacks

INPUT 1

INPUT 2

LEFT

(White)

RIGHT

(Red)

WK-1800/1600(E)-08~15 03.7.31, 5:20 PMPage 12 Adobe PageMaker 6.5J/PPC

1 ... 13 14 15 ... 96

Comments to this Manuals

No comments

Casio WK1630 User Manual Page 14

Comments to this Manuals

Related products and manuals for Musical Instruments Casio WK1630