Casio IT-500 User's Guide download pdf (Page 40)

E-38

Connecting the AC Adaptor and Connecting to Computer

Use the AC adaptor available as option for the Bridge Satellite Cradle/Bridge Basic

Cradle to supply the power to it. Always make sure that the power is being supplied to

the Bridge Satellite Cradle/Bridge Basic Cradle by the AC adaptor before performing

any type of data communication operation with the IT-500. The IT-500 draws the power

via the Bridge Satellite Cradle/Bridge Basic Cradle during data communication.

1. After making sure that the Bridge Satellite Cradle/Bridge Basic Cradle power switch

is turned off, plug the AC adaptor into the AC adaptor jack on the back.

2. Next, plug the AC adaptor into a power outlet.

After making sure that the Bridge Satellite Cradle/Bridge Basic Cradle and your

computer are both turned off, remove the cap from the RS-232C interface (IT-564IOE

only) or USB interface on the back of the Bridge Satellite Cradle/Bridge Basic Cradle,

and connect to your computer with an RS-232C cable (DT-887AXA) or USB cable

(DT-380USB).

Be sure to keep the Bridge Satellite Cradle/Bridge Basic Cradle connection ports

covered whenever you are not using them.

RS-232C Connection

• Connect an RS-232C cable (DT-887AXA) to the RS-232C port of the Bridge

Satellite Cradle. Connect the other end to your computer’s RS-232C port.

USB Connection

• Connect a USB cable (DT-380USB) to the USB port of the Bridge Satellite Cradle/

Bridge Basic Cradle. Connect the other end to your computer’s USB port.

When using the

RS-232C port

Power contacts

Power switch (ON)

Communication Indicator Lamp (IT-564IOE only)

Power switch (OFF)

Power Indicator Lamp

POWER DATA LINE

System Status Indicator Lamp

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 57 58

No comments

Casio IT-500 User's Guide Page 40