Casio IT-3100 User's Guide download pdf (Page 38)

E-36

Using the Printer

10. Fasten Part A of the Paper Holder to

the Handheld Printer Terminal.

Press both ends of Part A to fasten to

the Handheld Printer Terminal.

11. Insert the projections on both sides of

Part into the grooves of Part B and

fasten to the Handheld Printer

Terminal with the four screws for the

Paper Holder.

12. While spreading apart both ends of

Part A ( ), remove Part A from the

Handheld Printer Terminal by lifting

up Part A until the projections reach

the upper edges of the grooves of

Part B ( ), and then press on Part C

and Part D from the left and right

sides ( ). Next, push on both ends

of Part A to fasten to the Handheld

Printer Terminal.

Remove the Holder

1. Check that the power is off. If the

power is on, always make sure to turn it

off by pressing the power key.

2. Remove the Paper Holder by following

the reverse procedure for "Attaching the

Paper Holder", and then attach the Roll

Paper Holder.

• Remove Part C and Part D using an

ordinary screwdriver as shown in the

illustration.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

No comments

Casio IT-3100 User's Guide Page 38