Casio DT-x30 User Manual download pdf (Page 51)

E-49

Important !

Never short out the power contacts of the Cradle-type Battery Charger. This

can damage the Cradle-type Battery Charger.

Allowing the power contacts become wet can cause an electric shock or ﬁ re. In

addition, if the contacts become soiled, contact may be impaired resulting in

poor charging. For reasons of safety and maintaining charging battery pack(s)

in optimum condition, clean the power contacts by wiping with a dry cloth or

cotton swab after disconnecting the AC adaptor.

When placing the DT-X30 into the cradle, make sure that it is seated properly

and that the power LED at the front of the Cradle-type Battery Charger is lit in

green. Charging and communication will not proceed properly if the Handheld

Terminal is not seated properly.

Speciﬁ cations

1. Charging Speciﬁ cations

Charging Method: Constant current/voltage (the charging circuit is built in

DT-X30)

Charge Period: Approximately 5 hours

2. Power Supply

Power Source: AC adaptor (AD-S42120B*)

Consumption Current: 12V DC 2.6A

Output to Handheld Terminal:

9.5V DC 2.7A (max.)

3. AC Adaptor

Model: AD-S42120B

Input: 100V to 240V AC 50/60Hz 1.2A

Output: 12V DC 3.5A

4. Dimensions and Weight

Dimensions: Approximately

120(W)

144(D)

129(H) mm









u





"H)

Weight: Approximately 300g (10.6oz)

5. Operating Environment

Temperature: 0°C to 40°C (32°F to 104°F)

Humidity: 30% to 80% RH (non-condensation)

* See page 44.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Comments to this Manuals

No comments

Casio DT-x30 User Manual Page 51

Comments to this Manuals

Related products and manuals for Serial switch boxes Casio DT-x30