Casio CTK6000 User Manual Page 32
- Page / 77
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
20.3.5 act : Action
Format: 0aaaaaaaB
This field indicates the operation of the Instrument-specific System Exclusive Message.
aaaaaaaB Action Function
00H IPR Individual Parameter Request
01H IPS Individual Parameter Send
02H OBR One-way Bulk Parameter Set Request
03H OBS One-way Bulk Parameter Set Send
04H HBR Handshake Bulk Parameter Set Request
05H HBS Handshake Bulk Parameter Set Send
08H SBS Start of Bulk Dump Session Session
09H EXI Extend Interval
0AH ACK Acknowledge
0BH RJC Reject
0DH ESS End of Sub-session
0EH EBS End of Bulk Dump Session
0FH ERR Error
IPR:Individual Parameter Request Indicates an individual parameter value send request message.
When the Instrument receives this action, it uses an IPS message to return the specified parameter value.
IPS:Individual Parameter Send Indicates an individual parameter value send message. When
the Instrument receives this action, it rewrites the value specified by the data field with the specified
parameter value.
OBR:One-way Bulk Parameter Set Request Indicates a send request message using parameter
set image one-way mode. When the Instrument receives this action, it uses an OBS message to return
the specified parameter set.
OBS:One-way Bulk Parameter Set Bulk Send Indicates a parameter set image send message
using one-way mode. When the parameter set to be transferred is greater than a preset size, it is
divided into multiple packets and transferred at prescribed time intervals. The time interval is set
in accordance with the Oneway Current Interval parameter described under “24.2 System Exclusive
Protocol Parameter”.
HBR:Handshake Bulk Parameter Set Request Indicates a send request message using the pa-
rameter set image handshake mode. When the Instrument receives this action, it uses an HBS message
to return the specified parameter set.
HBS:Handshake Bulk Parameter Set Send Indicates a parameter set image send message using
handshake mode. The parameter set to be transferred is divided into multiple packets when it is greater
than a prescribed size. The packets are transferred in accordance with handshake mode.
EXI:Extend Interval During a dump session, message sent by a devices that should send the next
message to tell a device waiting for the next message to extend the message interval. Receipt of this
message causes the message wait elapsed time to reset to 0.
32
- MIDI Implementation 1
- III System Message 25 2
- V Parameter List 49 3
- VI Parameter Set List 56 4
- VII DSP Parameter List 57 4
- MIDI Message Overview 7
- Channel Message 10
- 10 Control Change 11
- 10.3 Data Entry (06H,26H) 12
- 10.4 Volume (07H) 12
- 10.5 Pan (0AH) 12
- 10.6 Expression (0BH) 12
- 10.8 Hold1 (40H) 13
- 10.10 Soft (43H) 14
- 10.11 Release Time (48H) 14
- 10.9 Sostenuto (42H) 14
- 10.12 Attack Time (49H) 15
- 10.13 Filter Cut Off (4AH) 15
- 10.14 Vibrato Rate (4CH) 15
- 10.15 Vibrato Depth (4DH) 16
- 10.16 Vibrato Delay (4EH) 16
- 10.17 Reverb Send (5BH) 16
- 10.18 Chorus Send (5DH) 16
- 10.19 NRPN (62H,63H) 17
- 10.20 RPN (64H,65H) 20
- 11 Mode Message 22
- 12 Program Change 23
- 13 Channel After Touch 24
- 14 Pitch Bend 24
- System Message 25
- Messages 30
- 20.3 Format of Each Field 31
- Note1 : AT-3/AT-5 only 34
- 22 Parameter Set Transfer 39
- Protocol Parameter” 44
- Parameter List 49
- 25 Patch Parameter 52
- 26 Tone Parameter 53
- 27 Scale Memory Parameter 54
- 28 DSP Parameter 54
- 29 All Data Parameter 55
- 30 Sequence Parameter 55
- 31 Registration Parameter 55
- 32 Rhythm Parameter 55
- Parameter Set List 56
- DSP Parameter List 57
- 35 DSP Parameter Set Type 58
- 35.8 Flanger 60
- 35.9 Chorus 60
- 35.10 Delay 60
- 35.11 Reflection 60
- 35.12 Rotary 61
- 35.13 Ring Modulator 61
- 35.14 LoFi 61
- 35.15 Wah Compressor 62
- 35.16 Wah Distortion 62
- 35.17 Wah Chorus 62
- 35.18 Wah Flanger 62
- 35.19 Wah Reflection 63
- 35.20 Wah Tremolo 63
- 35.21 Wah Pan 63
- 35.22 Compressor Wah 64
- 35.23 Compressor Distortion 64
- 35.24 Compressor Chorus 64
- 35.25 Compressor Flanger 64
- 35.26 Compressor Reflection 64
- 35.27 Compressor Tremolo 65
- 35.28 Compressor Pan 65
- 35.29 Distortion Wah 65
- 35.30 Distortion Compressor 65
- 35.31 Distortion Chorus 65
- 35.32 Distortion Flanger 66
- 35.33 Distortion Reflection 66
- 35.34 Distortion Tremolo 66
- 35.35 Distortion Pan 66
- 35.36 Chorus Reflection 66
- 35.37 Chorus Pan 67
- 35.38 Flanger Reflection 67
- 35.39 Flanger Pan 67
- 35.40 Reflection Distortion 67
- 35.41 Reflection Chorus 68
- 35.42 Reflection Pan 68
- 35.43 Tremolo Distortion 68
- 35.44 Tremolo Chorus 68
- 35.45 Tremolo Flanger 69
- 35.46 Tremolo Reflection 69
- Part VIII 70
- 36 Setting Value Tables 70
- 36.12 0-3 Setting Value Table 72
- MIDI Implementation Notation 75
- MA1012-A 77
Related products and manuals for The input devices Casio CTK6000
The input devices Casio WK6500E1A User Manual
(132 pages)
(132 pages)
The input devices Casio LK-270 User Manual
(46 pages)
(46 pages)
(2 pages)
The input devices Casio SA-65 User Manual
(18 pages)
(18 pages)
The input devices Casio WK6500E1B User Manual
(132 pages)
(132 pages)
The input devices Casio WK220 User Manual
(77 pages)
(77 pages)
The input devices Casio AP-400 User Manual
(45 pages)
(45 pages)
The input devices Casio CTK-4000 User Manual
(80 pages)
(80 pages)
The input devices Casio PX-120 User Manual
(40 pages)
(40 pages)
The input devices Casio wk200 User Manual
(80 pages)
(80 pages)
© 2020, manymanuals.com. All rights reserved. | 1.303 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals