Casio QV-10A User Manual download pdf (Page 7)

Power Supply

The QV-10 features a two-way power supply that lets you use either

batteries (AA-size Alkaline) or household AC current.

To load batteries

Be sure that camera power is turned off whenever loading or replac-

ing batteries.

1. Slide the battery compartment lock on the bottom of the

camera in the direction indicated by arrow (1), and swing

open the battery compartment cover as indicated by arrow

(2).

2. Insert four batteries.

Be sure to use only AA-size Alkaline batteries. Never use

manganese batteries (see precautions on the next page).

• Make sure that the positive + and negative - ends of the

batteries are facing correctly.

Getting Acquainted

3. Close the battery compartment cover.

• Press down on the battery compartment cover at the point

marked A in the nearby illustration until the cover locks into

place with a click.

• Make sure that the positive + and negative - ends of the batteries

are facing properly when you load them in the camera.

• Remove batteries from the camera if you do not plan to use it for

more than two weeks.

• Never mix old batteries with new ones.

• Never recharge batteries, never allow direct connection between

two ends of a battery, and never try to take batteries apart.

• Do not expose batteries to direct heat or dispose of them by burn-

ing. Doing so can create the danger of explosion.

Never load manganese batteries into

the camera! Doing so not only results

in shortened battery life, it also causes

batteries to generate heat that can

cause serious damage to the camera.

Always use Alkaline batteries only.

Battery Handling Precautions

Incorrect use or handling of batteries can cause them to leak or burst

and seriously damage your camera. Be sure to note the following

important precautions to avoid problems with batteries.

Caution

• Never mix batteries of different types.

• Dead batteries are susceptible to leakage, which can cause serious

damage to your camera. Remove batteries from the camera as

soon as you notice they are dead.

Standard Battery Life

You can generally expect to get about 120 minutes of operation from

a fresh set of LR6 (AM3) Alkaline batteries at normal temperature.

Note that battery life is shortened by extreme cold.

Power Supply

Getting Acquainted

Low Battery Indicator

A low battery indicator ( ) appears on the LCD whenever remain-

ing battery power drops below a certain level.

When this indicator appears, replace all four batteries with a fresh set

of new ones. Once the low battery indicator appears, you can expect

only about 10 more minutes of operation before total power failure.

Flash Memory

The QV-10 features flash memory for storage of images. Flash

memory does not require electrical power to store data, so image

data is retained in memory even when you turn camera power off. If

batteries go dead, simply load a set of new batteries or connect the

AC adaptor and you will be able to view images in camera memory.

1 2 3 4 5 6 7 8 ... 23

Comments to this Manuals

No comments

Casio QV-10A User Manual Page 7

Comments to this Manuals

Related products and manuals for Tools Casio QV-10A