Casio PA-2500 Specifications download pdf (Page 13)

4. Power Control

4.1 Power-ON Factors

Power-on factors include:

The power is turned on by pressing the POWER SW.

The power is automatically turned on at the specified time by the alarm function.

The power is automatically turned on if the CD signal is detected by the PA-2400 connected

to PC via the RS-232C cable.

The power is automatically turned on when the PA-2400 is mounted on I/O Box.

(This function is not supported for the PA-2500.)

If the power is supplied from the I/O Box, the detection on which the PA-2400 is being mounted

on I/O Box can turn on the power. The APO and POWER SW functions are operable while the

PA-2400 is supplied with power from the I/O Box.

The power is turned on by pressing the Notification button.

4.2 Power-ON Disable Factors

The following conditions are checked before the power is turned on. If any of the following

conditions exist, the power is not turned on.

If the main battery voltage is too low for the PA-2400 to be booted up.

If the battery lock is not secured.

If the compact flash card cover is off.

4.3 Power-OFF Factors

Power-off factors include:

The power is turned off by pressing the POWER SW if the power is on.

The power is automatically turned off, as specified in program setup, if any operation (key

operation, touch panel operation, disk operation, card access, or communication) is not

performed in a given period of time. This is called the APO function.

The power is automatically turned off if the main battery voltage is below the specified level.

The power is turned off if the battery cover lock is released.

Power is turned off if the compact flash card lock is released.

1 ... 12 13 14 ... 24

No comments

Casio PA-2500 Specifications Page 13