Casio 5182 User Manual download pdf (Page 2)

Operation Guide 5182

E-10

Power Levels

You can get an idea of the watch’s power level by

observing the movement of the x

Second Hand in the

Timekeeping Mode.

If the

Second Hand is moving normally at one-second

intervals, power is at Level 1.

If the

Second Hand is moving at two-second intervals,

power is at Level 2, which is quite low. Expose the watch

to light as soon as possible so it can charge.

Moves at two-second

intervals.



B +

E-11

Level Hand Movement Function Status

1 Normal. All functions enabled

Second Hand moves at two-second

intervals.

Day changes to 1 (home position).

Beeper disabled

Second Hand stopped.

z Hour Hand and c

Minute Hand

stopped at 12 o’clock.

All functions disabled

When power drops to Level 3, all functions will be disabled but the watch will x

continue to keep time internally for about one week. If you recharge the battery

sufﬁ ciently during this period, the analog hands will move automatically to the

correct setting and regular timekeeping will resume. After one week, all settings

(including timekeeping) will be cleared. Recharging the battery will reset all settings

to their initial factory defaults.

E-12

Power Recovery Mode

The watch is designed to go into a power recovery mode that stops hand operation

temporarily whenever power suddenly drops below a certain level due to overuse

of the alarm tone over a short period. Note that all operations are disabled while the

watch is in the power recovery mode.

The hands will move to the correct positions and the watch will resume normal

operation after power recovers (in about 15 minutes). Putting the watch in a location

where it is exposed to light will help power to recover sooner.

E-13

Charging Times

Exposure Level (Brightness)

Daily

Operation

Level Change *2

Level 3 Level 2 Level 1

Outdoor sunlight (50,000 lux) 8 minutes 2 hours 27 hours

Window sunlight (10,000 lux) 30 minutes 6 hours 100 hours

Window sunlight on cloudy day

(5,000 lux)

48 minutes 10 hours 162 hours

Indoor ﬂ uorescent lighting (500 lux) 8 hours 112 hours – – –

1 Approximate exposure each day to generate power for normal daily operation. *

2 Approximate exposure to take power up one level. *

The above times are for reference only. Actual times depend on lighting conditions.

For details about the operating time and daily operating conditions, see the “Power x

Supply” section of the Speciﬁ cations (page E-59).

E-14

Power Saving

Power Saving enters a sleep state automatically whenever the watch is left for a

certain period in an area where it is dark. The table below shows how watch functions

are affected by Power Saving.

There actually are two sleep state levels: “second hand sleep” and “function sleep”.

Elapsed Time in Dark Operation

60 to 70 minutes (second hand sleep)

Second Hand only stopped at 12 o’clock, all

other functions enabled

6 or 7 days (function sleep)

All functions, including analog timekeeping, x

disabled

Internal timekeeping maintained x

The watch will not enter a sleep state between 6:00 AM and 9:59 PM. If the watch x

is already in a sleep state when 6:00 AM arrives, however, it will remain in the sleep

state.

The watch will not enter a sleep state while it is in the Stopwatch Mode.

E-15

To recover from the sleep state

Move the watch to a well-lit area or press any button.

E-16

Mode Reference Guide

Your watch has four “modes”. The mode you should select depends on what you

want to do.

Note

There are also various setting modes, which you can enter by holding down x A in

the Timekeeping Mode. See “Setting Modes” (page E-20) for more information.

E-17

To do this: Enter this mode: See:

View the current time in your Home City and in one of 29 other x

cities around the globe

View the current date in the Home City

Timekeeping

Mode

E-23

Use the stopwatch to measure elapsed time Stopwatch Mode E-35

Select one of 29 cities (time zones) around the world and view x

the current time there

Select daylight saving/summer time (DST) or standard time x

for a time zone

World Time Mode E-40

Set an alarm time Alarm Mode E-46

E-18

Selecting a Mode

With this watch, everything starts from the Timekeeping Mode.

To determine the watch’s current mode

Check the position of the v

Left Dial Hand as shown

under “To select a mode” (page E-19).

To return to the Timekeeping Mode from any other

mode

Hold down C for at least two seconds.



E-19

To select a mode

Press C to cycle between the modes as shown below. The v

Left Dial Hand

indicates the currently selected mode.

The

Left Dial Hand rotates so the indicator for the current mode (TM, ST, WT, AL)

is aligned with the pointer

Timekeeping Mode Stopwatch Mode

Left Dial Hand indicates

TM.

Left Dial Hand indicates

ST, then aligns the dial hand

with the pointer

World Time Mode

Left Dial Hand indicates

WT, then aligns the dial hand

with STD or DST.

Alarm Mode

Left Dial Hand indicates

AL.

1 2 3 4 5 6 7

Operation Guide 5182 1

Comments to this Manuals

No comments

Casio 5182 User Manual Page 2

Comments to this Manuals

Related products and manuals for Watches Casio 5182