Casio n/a n/a User Manual download pdf (Page 1)

Operation Guide 5175

MA1004-EA

■ For a watch with an elapsed time bezel

Rotate the elapsed time bezel to align the

mark with the

minute hand.

After certain amount of time elapsed, read the graduation on

the elapsed time bezel which the minute hand points to.

The elapsed time is indicated.

• Some water resistant models are equipped with a screw lock

crown.

• With such models, you must unscrew the crown in the

direction noted in the illustration to loosen it before you can

pull it out. Do not pull too forcibly on such crowns.

• Also note that such watches are not water resistant while

their crowns are loosened. Be sure to screw the crowns back

in as far as they will go after making any setting.

Specifications

Accuracy at normal temperature: ± 20 seconds a month

Display: 3 analog hands (timekeeping hour and minutes, stopwatch seconds),

3 dials (timekeeping seconds/stopwatch 1/20 second, stopwatch minutes,

stopwatch hour), day

Stopwatch function: Measuring capacity: 11:59'59.95''

Measuring unit: 1/20 second

Measuring mode: Elapsed time

Battery: One silver oxide battery (Type: SR927W)

Approximately 2 years on type SR927W

• The configuration of your watch may differ somewhat from that shown in the illustration.

To set the day

1. Pull the crown out to the first click.

2. Set the day by rotating the crown towards you.

3. Push the crown back in to the normal position.

• Avoid changing the date setting while the current time is between 9:00 p.m. and 1:00 a.m.

Using the Stopwatch

The stopwatch lets you measure elapsed time up to 11 hours, 59 minutes,

59.95 seconds.

To measure elapsed time

1. Press B to enter the Stopwatch Mode.

2. Press A to start the stopwatch.

3. Press A to stop the stopwatch.

• You can resume the measurement operation by pressing A again.

4. Check the elapsed time.

• The example above shows an elapsed time of 3 hours, 2 minutes,

37.80 seconds.

• Press B to reset the stopwatch.

To return the function of the stopwatch 1/20 second hand to the timekeeping

second hand (indicating the current seconds count), press B again. This will

enter the Timekeeping Mode.

Notes:

• Do not try to perform stopwatch operations while the crown is pulled out either to

the first or second click. If you try to press a button, you might accidentally cause

the crown to rotate and change the current time or day setting.

• If the starting positions of the stopwatch second hand and 1/20 second hand

become misaligned, use the following procedures to adjust the position of the

stopwatch second hand so it points to 12 o’clock and the 1/20 second hand so it

points to .0 when the stopwatch is reset.

To adjust the positions of the stopwatch hands

1. Press B to reset the stopwatch, and check the alignment of the stopwatch

second hand and 1/20 second hand.

2. Pull out the crown to the second click.

3. Press A to move the stopwatch second hand.

4. If the stopwatch 1/20 second hand is aligned correctly, proceed to step 5. If the

stopwatch 1/20 second hand is also misaligned, press B to move the stopwatch

1/20 second hand.

5. After making the adjustments you want, push the crown back in to its normal position.

• Note that pulling the crown out also stops the timekeeping second hand. After

performing the above procedure, you should also adjust the timekeeping setting.

To set the time

1. Pull the crown out to the second click.

• At this time, the second hand will

move to the 12 o’clock position and

stop there.

2. Set the hands by rotating the crown.

Rotate the crown to move the hands

clockwise. Move the minute hand four

or five minutes past the time you

want to set, and then back it up to the

proper setting.

• Carefully set the time, making sure

to distinguish between AM and PM.

3. Push the crown back in to the normal

position to restart timekeeping.

Minute hand

Hour hand

First click

(Setting day)

Second click

(Setting time)

Crown

(Normal position)

Second hand

Elapsed time bezel

Stopwatch hour hand (3 hours)

Stopwatch second hand (37 seconds)

Stopwatch 1/20 second hand (.8 second)

•

This hand moves right and left for the first 60 seconds, and then

stops at the 0 position.

Stopwatch minute hand (2 minutes)

Operation Guide 5175 1

Summary of Contents

Page 1 - Operation Guide 5175

1Operation Guide 5175MA1004-EA For a watch with an elapsed time bezelRotate the elapsed time bezel to align the mark with theminute hand.After certa

Comments to this Manuals

No comments

Casio n/a n/a User Manual Page 1

Browse online or download User Manual for Watches Casio n/a n/a. Casio n/a n/a User's Manual

Summary of Contents

Comments to this Manuals

Casio n/a n/a User Manual Page 1

Browse online or download User Manual for Watches Casio n/a n/a. Casio n/a n/a User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Watches Casio n/a n/a