Casio Watch 3251 User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 3
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
3
Operation Guide 3165/3251
Illumination
Your watch uses two LEDs to illuminate the display for easy reading in the dark. In
any mode (except when the setting screen is on the display), press B to turn on
illumination for about one second.
About one second after it lights, display illumination will flash for about a half
second. After that, alert illumination will flash for about a half second.
Illumination Precautions
Illumination may be hard to see when viewed under direct sunlight.
Illumination turns off automatically whenever an alarm sounds.
Frequent use of illumination runs down the battery.
Auto Return Feature
If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it will change to the Timekeeping Mode automatically.
If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, the watch will exit the setting screen
automatically.
Scrolling
The A, B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a scroll
operation will scroll at high speed.
Specifications
Accuracy at normal temperature: ±30 seconds a month
Timekeeping: Hour, minutes, seconds, p.m., month, day, day of the week
Time Format: 4 (selectable)
12 - 11: 12-hour format that does not distinguish between noon and
midnight, which are both displayed as 12:00
0 - 11: 12-hour format that does not distinguish between noon and
midnight, which are both displayed as 0:00
0 - 23: 24-hour format that distinguishes between noon (12:00) and
midnight (0:00)
6 - 29: 24-hour format using a day that starts at 6:00 a.m. and ends at
5:59 a.m.
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Active Display on/off
Countdown Timer:
Measuring unit: 1 second
Input range: 1 minute to 60 minutes (1-minute increments)
Stopwatch
Measuring unit: 1/100 second
Measuring capacity: 59'59.99''
Measuring modes: Elapsed time
Alarm: Daily alarm
Dual Time: Hour, minutes, p.m.
Illumination: Two LEDs (light-emitting diodes)
Other: Button operation tone on/off; Flash Alert (using two display illumination LEDs);
Auto Display
Battery: One lithium battery (Type: CR1616)
Battery Life: Approximately 2 years on type CR1616 under the following conditions
One 10-second alarm operation per day
One 1.5-second illumination per day
24 mode changes per day
100 automatic display style changes by Active Display per day
Page view 2
1 2 3

Comments to this Manuals

No comments