Casio QV-2800UX User's Guide download pdf (Page 54)

BASIC IMAGE RECORDING

E-54

Precautions when Using Flash

• Make sure that you do not touch or block the flash or the

exposure sensor with your fingers. Doing so can soil these

components and interfere with correct flash operation.

• The flash unit does not charge when battery power is too

low to charge the flash. The (Flash Off) indicator ap-

pears to warn you that the flash will not fire correctly, which

may affect exposure of the image. Replace batteries as

soon as possible when this happens.

• Red-eye reduction may not work well when the camera

is not pointed directly at the subject or when the subject is

far from the camera.

• In the Red-eye Reduction Mode , the flash is fired auto-

matically in accordance with exposure. Because of this,

the flash does not fire if the subject is well-lit.

• White balance is fixed while the flash is being used, so sun-

light, fluorescent lighting, or other sources of illumination in

the immediate area may affect the coloring of the recorded

image.

• The effective range for the built-in flash depends on your

camera model.

* QV-2300UX: Approximately 0.5m to 2m (at full aperture)

* QV-2800UX: Approximately 0.5 to 2.5m (at full aperture)

Note that you may not be able to obtaine the desired flash

result outside the ranges noted above.

• Depending on operating conditions (type of batteries being

used, temperature, etc. ), it may take up to 10 seconds for

the flash unit to charge.

• The flash is disabled during movie recording, which is indi-

cated by the (Flash Off) icon on the monitor screen.

Flash

Exposure sensor

QV-2800UX

Flash

Exposure sensor

QV-2300UX

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 150 151

No comments

Casio QV-2800UX User's Guide Page 54