Casio EG-800 User Manual download pdf (Page 38)

Note

• Use of a USB connection requires installation of the USB driver on your computer.

• You can also use the AC adapter/charger in place of the AC adapter in the above

configuration. See page 35 for more information.

■ To connect using a 16-pin serial cable

Important

Be sure to turn off the CASSIOPEIA and your computer before connecting the cradle.

1. Slide the cradle’s serial/USB port cover so the serial port is open.

2. Connect as illustrated below.

Note

• You can use the above configuration to connect directly to a computer’s 9-pin serial

port. If your computer has a 25-pin serial port, you will need to purchase a

commercially available connector (9-pin to 25-pin).

• You can also use the AC adapter/charger in place of the AC adapter in the above

configuration. See page 35 for more information.

■ Mounting the CASSIOPEIA Onto the Cradle

Important

Make sure that CASSIOPEIA power is turned off before you place it onto or remove it

from the cradle.

AC adapter

Cradle

Serial port

16-pin Serial cable

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 54 55

No comments

Casio EG-800 User Manual Page 38