Casio CELVIANO AP-33V User Manual download pdf (Page 32)

E-28

427B-E-032A

Figure 6

Caution

Take care that you do not pinch your fingers between

the keyboard and stand!

Figure 4

2 Installing the Keyboard

onto the Stand

Be sure that you securely anchor the keyboard to the stand

using the K butterfly bolts (Figure 6).

• Slide the screws on the bottom of the keyboard into the

slots in the two angle brackets F. Next, secure the keyboard

to the stand with two butterfly bolts K (Figure 7).

Figure 7

Front

Back

• The butterfly bolts keep the keyboard from falling from the

stand. Be sure that you always secure the keyboard with

the butterfly bolts.

6.Rotate height adjustment screw H until it supports cross-

piece D, preventing the crosspiece from bending when you

press the pedals (Figure 5).

IMPORTANT!

Be sure to install adjustment screw H and perform the ad-

justment procedure described above before depressing the

pedals. Failure to do so can result in damage to crosspiece

5.Attach back panel C to the E brackets and crosspiece D.

Note that the back panel C should be installed so it is in

front of the E brackets (Figure 4). Use the two L screws,

six I screws to secure the back panel in place (Figures 3

and 4). Note that you must also install the second J clip at

this time as shown in the illustration.

• First, install the topmost L screws on the left and right

sides of the back panel C. Note that you should slip the

other J clip onto the I screw at point 6 before you

screw the I screw in.

• The back panel C should rest on the feet of side uprights

A and B as indicated by 7 in the illustration. Press the

back panel C against crosspiece D while installing the

L screws.

Figure 5

(Back)

AP31/33_E_26_30.p65 03.10.22, 5:05 PMPage 28 Adobe PageMaker 6.5J/PPC

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 49 50

Comments to this Manuals

No comments

Casio CELVIANO AP-33V User Manual Page 32

Comments to this Manuals