Casio XJ-UT310WN User's Guide download pdf (Page 56)

100

101

Setup Menu Settings

z One or more letters (such as RCV) after the menu item name indicates an item that is available only

when one or more particular input source is selected. The letters indicate the input source(s) where

the menu item is available.

R: RGB input, C: Component input, V: S-video input or Video input, H: HDMI (PC) input,

D: HDMI (DTV) input, F: File Viewer, T: CASIO USB Tool, N: Network, U: USB Display

z A menu item that does not have any letter after it will be available regardless of the input source.

z The initial default setting is indicated by an asterisk (*).

Use this menu item: To do this:

Image Adjustment 1 3

Brightness

Adjust projected image brightness.

Image Adjustment 1 3

Contrast

Adjust projected image contrast.

Image Adjustment 1 3

Sharpness (V)

Use this sub-menu to adjust the sharpness of the outlines in the projected image. A

larger value makes the image sharper, while a smaller value makes it softer.

Image Adjustment 1 3

Saturation (V)

Use this sub-menu to adjust the color saturation of the projected image. A larger

value increases color saturation.

Image Adjustment 1 3

Tint (V)

Use this sub-menu to adjust the tint of the projected image.

A larger value makes the overall image more bluish, while a smaller value makes the

overall image more reddish. This setting is supported only when the signal is NTSC

or NTSC4.43.

Image Adjustment 1 3

Color Mode

Select one of the following projected image color modes: “Standard*”, “Graphics”,

“Theater”, “Blackboard”, “Natural”.

Image Adjustment 1 3

Color Balance

Select one of the following color balance presets: “Warm”, “Normal*”, “Cold”.

Also can be used to separately adjust red, green, and blue.

Image Adjustment 1 3

Eco Off Mode

When “Off” is selected for the “Option Settings 1 3 Eco Mode” setting, specify

either “Bright” (brightness priority) or “Normal*” (hue priority) as the image quality

setting.

Image Adjustment 1 3

Restore Menu Defaults

Return all of the items in the “Image Adjustment 1” main menu to their initial defaults

for the currently projecting image source.

Image Adjustment 2 3

Vertical Position (RCV)

Adjust the vertical and horizontal positions of the input source image in relation to

the target screen.

Image Adjustment 2 3

Horizontal Position (RCV)

Image Adjustment 2 3

Frequency (R)

When vertical bands appear in the projected image while RGB is selected as the

input source, it means that the frequency setting is not correct. When this happens,

use this setting to adjust the frequency manually. If, for some reason, your manual

frequency settings cause the image input from the computer to disappear from the

projection, you can press the [AUTO] key to perform an auto adjust operation, which

should cause the image to appear.

Image Adjustment 2 3

Phase (R)

Adjust the phase of the RGB input signal when the image flickers because the

projector phase and RGB input signal phase do not match.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 100 101

Comments to this Manuals

No comments

Casio XJ-UT310WN User's Guide Page 56

Comments to this Manuals

Related products and manuals for Projectors Casio XJ-UT310WN