Casio DT-X30 Series Specifications Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 180
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
24
1.18 Cradle specific information
By using a LAN/USB cradle, a terminal is connectable with LAN.
A LAN cable is connected to a LAN/USB cradle and it becomes the form which sets a terminal.
A connection setup to LAN, such as an IP address, is possible for both a cradle unit and a terminal
unit.
Cradle ID
It’s possible to set “Cradle ID” to the cradle.
The functions of the System Library related with the “Cradle ID“ are as shown below.
setCradleID
: This function sets cradle ID that identifies the connected cradle.
getCradleID
: This function acquires cradle ID in order to identify the connected cradle.
Cradle IP
It’s possible to set IP address, subnet mask, and default gateway of cradle.
When terminal connected to the cradle, terminal can communicate with IP information set in the
cradle. (Default is to use the settings on the terminal side)
Refer to the “4.3 WIRELESS & NETWORK Settings” for the setting method which IP
information on the method, terminal, and cradle which set IP information to a cradle to use.
The functions of the System Library related with the “Cradle IP“ are as shown below.
setCradleIP
: This function sets cradle IP information.
getCradleIP
: This function retrieves cradle IP information.
setCradleIPSetting
: This function sets whether IP setting on the cradle is enabled or
disabled.
getCradleIPSettings
: This function retrieves whether IP information setting on the cradle is
enabled or disabled.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 179 180

Comments to this Manuals

No comments