Casio MPC-701 User's Guide download pdf (Page 104)

102

Connecting to the modem port

The built-in 56kbps modem provides a high-speed data communication

and facsimile transmission/reception capabilities. (The actual

communication speed depends on the local line conditions, etc.) You

can use this function by connecting the modular cable to the modem

port.

The built-in modem can be connected to the general telephone line

(analog). It cannot be connected directly to the digital line (the ISDN

circuit, etc.). Also, it cannot be connected to the line for a home telephone

or office telephone which uses the telephone switchboard. When

connecting to the ISDN circuit, the optional terminal adapter (TA), dial-

up router, etc. is also necessary. After connecting, setting the software

is necessary in order to perform the connection for communication via

the telephone or facsimile line.

Modular cable

1. Confirm that the power of this unit is turned off.

Connecting or disconnecting the modular cable should be performed

after turning off the power.

2. Open the lid of the modem port (

) and insert one end of the modular

cable securely until it clicks.

Important

• Do not transport the unit when the modular cable is connected to

the modem port. It causes a damage of the modem port or the

disconnection of the modular cable.

•When you make a dial-up connection to the pulse system telephone

line using the built-in modem, it may malfunction and call up a wrong

phone number unintentionally and fail to connect to the correct phone

number. To avoid this, do not start up an application that causes

frequent accesses to the hard disk. Also, do not connect the

peripherals or access them before completing the dial-up

connection.

MPC701M50E#p099~108 02.11.22, 10:15 AM102

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 159 160

No comments

Casio MPC-701 User's Guide Page 104