Casio CTK6000 User Manual Page 38
- Page / 77
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Table 1
7 6 5 4 3 2 1 0
Memory data 00: [00.7] [00.6] [00.5] [00.4] [00.3] [00.2] [00.1] [00.0]
Memory data 01: [01.7] [01.6] [01.5] [01.4] [01.3] [01.2] [01.1] [01.0]
Memory data 02: [02.7] [02.6] [02.5] [02.4] [02.3] [02.2] [02.1] [02.0]
:
Memory data 32: [32.7] [32.6] [32.5] [32.4] [32.3] [32.2] [32.1] [32.0]
(Bit M of the NNth byte is indicated at [NN.M].)
Table 2
7 6 5 4 3 2 1 0
Send data 00: 0 [00.6] [00.5] [00.4] [00.3] [00.2] [00.1] [00.0]
Send data 01: 0 [01.5] [01.4] [01.3] [01.2] [01.1] [01.0] [00.7]
Send data 02: 0 [02.4] [02.3] [02.2] [02.1] [02.0] [01.7] [01.6]
:
Send data 37: 0 0 0 [32.7] [32.6] [32.5] [32.4] [32.3]
Though transferred data always sequentially uses from bit 0 through bit 7, unused upper bit fields in
the final transfer data are filled in with 0.
Parameter Set Packet Splitting When a parameter set is transferred, a single parameter set memory
image can b e split so it can fit into the preset transfer message size, and transferred as multiple packets.
Even when a packet is split, the memory image must be transferred from the beginning in the sequence
it is arranged without interruption. When sending a parameter set to the Instrument, the size of a
System Exclusive message for a single packet must fit within a preset size. The parameter set memory
image to be transferred can be split into 1-byte units, and it does not matter whether the length of each
packet is different. When a packet receive error is generated, the sending device needs to resend, but
the size of the packet sent does not necessarily need to be the same size as the packet sent when the
error was generated. Even the sizes of parameter sets are small, using a single packet to send multiple
parameter sets is not supported. With this Instrument, the data size, transfer time interval, and other
communication parameters for split packets can be adjusted using the parameters described under “24.2
System Exclusive Protocol Parameter”. For details, see “24.2 System Exclusive Protocol Parameter.”
20.3.15 crc : Cyclic Redundancy Check
Format: LSB 0aaaaaaaB
0bbbbbbaB
0cccccbbB
0ddddcccB
MSB 0000ddddB
CRC32 (in accordance with ISO 8802-3 or IEEE803.2 regulations) 32-bit value (ddddddddccccccc-
cbbbbbbbbaaaaaaaaB) calculated for the byte string from “MAN: Manufacturer’s ID” to the last byte of
“img: Parameter Set Memory Image” is stored in this “crc: Cyclic Redundancy Check”. The receiving
unit checks the value, and if it is not correct sends an error as a re-request.
38
- MIDI Implementation 1
- III System Message 25 2
- V Parameter List 49 3
- VI Parameter Set List 56 4
- VII DSP Parameter List 57 4
- MIDI Message Overview 7
- Channel Message 10
- 10 Control Change 11
- 10.3 Data Entry (06H,26H) 12
- 10.4 Volume (07H) 12
- 10.5 Pan (0AH) 12
- 10.6 Expression (0BH) 12
- 10.8 Hold1 (40H) 13
- 10.10 Soft (43H) 14
- 10.11 Release Time (48H) 14
- 10.9 Sostenuto (42H) 14
- 10.12 Attack Time (49H) 15
- 10.13 Filter Cut Off (4AH) 15
- 10.14 Vibrato Rate (4CH) 15
- 10.15 Vibrato Depth (4DH) 16
- 10.16 Vibrato Delay (4EH) 16
- 10.17 Reverb Send (5BH) 16
- 10.18 Chorus Send (5DH) 16
- 10.19 NRPN (62H,63H) 17
- 10.20 RPN (64H,65H) 20
- 11 Mode Message 22
- 12 Program Change 23
- 13 Channel After Touch 24
- 14 Pitch Bend 24
- System Message 25
- Messages 30
- 20.3 Format of Each Field 31
- Note1 : AT-3/AT-5 only 34
- 22 Parameter Set Transfer 39
- Protocol Parameter” 44
- Parameter List 49
- 25 Patch Parameter 52
- 26 Tone Parameter 53
- 27 Scale Memory Parameter 54
- 28 DSP Parameter 54
- 29 All Data Parameter 55
- 30 Sequence Parameter 55
- 31 Registration Parameter 55
- 32 Rhythm Parameter 55
- Parameter Set List 56
- DSP Parameter List 57
- 35 DSP Parameter Set Type 58
- 35.8 Flanger 60
- 35.9 Chorus 60
- 35.10 Delay 60
- 35.11 Reflection 60
- 35.12 Rotary 61
- 35.13 Ring Modulator 61
- 35.14 LoFi 61
- 35.15 Wah Compressor 62
- 35.16 Wah Distortion 62
- 35.17 Wah Chorus 62
- 35.18 Wah Flanger 62
- 35.19 Wah Reflection 63
- 35.20 Wah Tremolo 63
- 35.21 Wah Pan 63
- 35.22 Compressor Wah 64
- 35.23 Compressor Distortion 64
- 35.24 Compressor Chorus 64
- 35.25 Compressor Flanger 64
- 35.26 Compressor Reflection 64
- 35.27 Compressor Tremolo 65
- 35.28 Compressor Pan 65
- 35.29 Distortion Wah 65
- 35.30 Distortion Compressor 65
- 35.31 Distortion Chorus 65
- 35.32 Distortion Flanger 66
- 35.33 Distortion Reflection 66
- 35.34 Distortion Tremolo 66
- 35.35 Distortion Pan 66
- 35.36 Chorus Reflection 66
- 35.37 Chorus Pan 67
- 35.38 Flanger Reflection 67
- 35.39 Flanger Pan 67
- 35.40 Reflection Distortion 67
- 35.41 Reflection Chorus 68
- 35.42 Reflection Pan 68
- 35.43 Tremolo Distortion 68
- 35.44 Tremolo Chorus 68
- 35.45 Tremolo Flanger 69
- 35.46 Tremolo Reflection 69
- Part VIII 70
- 36 Setting Value Tables 70
- 36.12 0-3 Setting Value Table 72
- MIDI Implementation Notation 75
- MA1012-A 77
Related products and manuals for The input devices Casio CTK6000
The input devices Casio WK6500E1A User Manual
(132 pages)
(132 pages)
The input devices Casio LK-270 User Manual
(46 pages)
(46 pages)
(2 pages)
The input devices Casio SA-65 User Manual
(18 pages)
(18 pages)
The input devices Casio WK6500E1B User Manual
(132 pages)
(132 pages)
The input devices Casio WK220 User Manual
(77 pages)
(77 pages)
The input devices Casio AP-400 User Manual
(45 pages)
(45 pages)
The input devices Casio CTK-4000 User Manual
(80 pages)
(80 pages)
The input devices Casio PX-120 User Manual
(40 pages)
(40 pages)
The input devices Casio wk200 User Manual
(80 pages)
(80 pages)
© 2020, manymanuals.com. All rights reserved. | 2.105 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals