Casio DT-9721CHGE Manual download pdf (Page 13)

Table 1.6 Names of parts and the descriptions

No. Part Name Description

1 USB Port This port accepts connection of a USB cable for connection to PC for

transfer of data and file. Use of the USB port requires installation of special

driver on the PC.

2 RS-232C Port This port accepts connection of an RS-232C cable for connection to PC for

transfer of data and file. Use of the RS-232C port requires installation of

special driver on the PC.

3 RS-422 Port This port is used when connecting to another Bridge Satellite Cradle.

4 AC Adaptor Jack Connect the dedicated AC adaptor here to supply power.

5 Terminal Detect

Switches

These switches detect when the terminal is mounted correctly on the Bridge

Satellite Cradle.

6 IR Port This port transfers data with the terminal’s IR port by non-contact data

communication.

7 Power Contacts Power is supplied to the terminal via these contacts.

This lamp indicates the power status and mounting status of the terminal.

Off : Power off.

Green : Power on and data communication is in progress.

8 Power Indicator Lamp

Red : Power on, but the terminal is not mounted.

This lamp shows when the terminal is performing data communication.

Off : No data communication being performed.

Green flashing : Data communication in progress.

9 Communication

Indicator Lamp

Red : Problem with connection between Bridge Satellite and

the terminal.

This lamp indicates whether the system is operating normally. It indicates

the system status and whether or not communication with the system can be

performed regardless of whether or not the terminal is mounted.

Off : System is not operating.

10 System Status Indicator

Lamp

Green : System is operating.

11 Power Key Turns the power on and off.

12 DIP Switches Use these switches to configure the Bridge Satellite Cradle as required.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 44 45

No comments

Casio DT-9721CHGE Manual Page 13