Casio EX-ZS10 Owner's Manual Page 80

  • Download
  • Add to my manuals
  • Print
  • Page
    / 142
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 79
80
Printing
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1. Turn on the camera. Next, press [SET] and then display the REC menu
(page 55) or the PLAY menu (page 71).
2. On the “Set Up” tab, select “USB” and then press [6].
3. Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
. Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the
camera to connect the
camera to your printer’s USB
port.
Make sure that you insert
the cable connector into
the USB/AV port until you
feel it click securely into
place. Failure to insert the
connector fully can result
in poor communication or
malfunction.
Note that even while the connector is fully inserted, you still
will be able to see the metal part of the connector as shown in
the illustration.
When connecting the USB cable to a USB port, make sure
you align the connector correctly with the port.
Connecting Directly to a PictBridge Compatible Printer
USB cable
(included with camera)
USB port
[USB/AV]
port
Making sure that the mark on the USB cable
connector is towards the lens side, connect the
cable to the camera.
Large connector
Small connector
C
Page view 79
1 ... 79 80 81 ... 142

Comments to this Manuals

No comments