Casio EX-ZS10 Owner's Manual download pdf (Page 69)

Viewing Snapshots and Movies

1. Use the AV cable that comes with the camera to connect it to the TV.

• Make sure that you insert the cable connector into the

USB/AV port until you feel it click securely into place.

Failure to insert the connector fully can result in poor

communication or malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as

shown in the illustration.

2. Turn on the TV and select its video input mode.

If the TV has more than one video input, select the one where the camera is

connected.

3. Press [p] (PLAY) to turn on the camera.

This will cause an image to appear on the TV screen, without anything appearing

on the camera’s monitor screen.

• Pressing [ON/OFF] (Power) or [r] (REC) will not turn on the camera while the

AV cable is connected.

• You also can change the aspect ratio of the screen and the video output

system (page 113).

4. Now you can display images and play back movies as you normally do.

Viewing Snapshots and Movies on a TV Screen

Yellow

AV cable (bundled)

[USB/AV] port

White

Making sure that the mark on the AV cable connector is towards the

lens side, connect the cable to the camera.

VIDEO IN jack (yellow)

AUDIO IN jacks (white)

AudioVideo

1 ... 68 69 70 ... 142

No comments

Casio EX-ZS10 Owner's Manual Page 69