Casio EX-ZS10 Owner's Manual download pdf (Page 98)

Using the Camera with a Computer

4. Turn off the camera and

then use the USB cable

that comes with the

camera to connect it to

your Macintosh.

• Connecting the camera to

a computer with a USB

cable starts charging of

the camera’s battery

(page 18).

• Make sure that you insert

the cable connector into

the USB/AV port until you

feel it click securely into

place. Failure to insert the

connector fully can result

in poor communication or

malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as

shown in the illustration.

• When connecting the USB cable to a USB port, make

sure you align the connector correctly with the port.

• Your computer may not be able to recognize the camera

if you connect via a USB hub. Always connect directly to the computer’s USB

port.

5. Turn on the camera.

The camera’s back lamp will light green at this time. In this mode, your Macintosh

recognizes the memory card loaded in the camera (or the camera’s built-in

memory if it does not have a memory card loaded) as a drive. The appearance of

the drive icon depends on the Mac OS version you are using.

• The first time you connect the camera to your Macintosh with the USB cable,

an error message may appear on your computer. If this happens, disconnect

and then reconnect the USB cable.

• Charging continues even if the camera is turned on (page 20).

6. Double-click the camera’s drive icon.

7. Drag the “DCIM” folder to the folder to which you want to copy it.

USB port

USB cable

(included with camera)

Large connector

Small connector

Making sure that the mark on the USB cable

connector is towards the lens side, connect the cable

to the camera.

[USB/AV]

port

1 ... 97 98 99 ... 142

Comments to this Manuals

No comments

Casio EX-ZS10 Owner's Manual Page 98

Comments to this Manuals

Related products and manuals for Bridge cameras Casio EX-ZS10