Casio EA-200 User Manual download pdf (Page 24)

20031201

3-5

Setup

Mode Parameters

This section explains the parameters that can be configured on the [Sample] tab and

[Trigger] tab of the Setup dialog box, in accordance with the mode selected on the [Sample]

tab.

k Parameters Common to All Modes

The following explains the parameters that normally appear, regardless of the currently

selected mode.

Sampling Interval: Specify a value for the sampling interval. If you specify an interval of

one second, for example, a sample will be taken every second.

Number of Samples: Specify the number of samples that should be taken. The total

sampling time is calculated in accordance with the specified interval

and number of samples, and displayed on the [Single] tab of the

Sensor Setup window.

Warm-Up: Specify the warm-up time for the sensor. You can select from among

the following options for this setting.

Auto: Automatically sets a preset value for each sensor.

Manual: Selecting this option displays a dialog box like the one

shown below. Specify a warm-up time in the range of 1

to 99 seconds, and then tap [Set].

Start Trigger: Specify the event that triggers the start of sampling. You can select

from among the following options for this setting.

Tap Screen: This option specifies that sampling should start when

[OK] is tapped on the screen.

Count Down: This option specifies that sampling should start when the

end of a countdown is reached.

CH1: This option specifies that sampling should start when

CH1 channel input reaches a certain value.

SONIC: This option specifies that sampling should start when

SONIC channel input reaches a certain value.

Microphone: This option specifies that sampling should start when the

EA-200’s microphone detects a sound.

20050601

1 ... 23 24 25 ... 81

No comments

Casio EA-200 User Manual Page 24