Casio KL-750 User Manual download pdf (Page 14)

E-13

Part 7 Memory

This part of the manual tells you how to store text data in memory for instant

recall when you need it. You can store two blocks of text in memory, each con-

taining up of 63 characters, for a total of 126 characters.

To store data

1. Input the text you want to store.

2. Press FUNCTION and then 1 (MEMO).

3. Press SET to store the text in memory or ESC

to abort the store procedure without storing

anything.

• If there is nothing in memory yet, your text is

automatically stored in Area 1. If Area 1 already

contains data, your new input is automatically

stored in Area 2.

• If there is not enough room for your text to fit in

memory, the message “FUL!” appears when you

press SET in step 3.

To recall text from memory

Example: To recall the contents of Area 2 while memory contains the following

text.

Area 1: ABCDEFG

Area 2: CASIO

1. While the input screen is on the display, press

FUNCTION and then 1 (MEMO).

• Note that text recalled from memory will replace

any text currently on the display.

Auto Feed

You can turn the Label Printer’s auto feed feature on and off. When auto feed is

on, the Label Printer automatically feeds the tape about 12mm at the beginning

and end of each print operation. This creates identical margins on both sides of

your text.

Important!

• After you finish printing when using manual feed, be sure to always press

FUNCTION and then PRINT (FEED) to feed the tape before cutting it. If you

don’t you will cut off part of the printed text.

To turn auto feed on and off

1. Press FUNCTION and then 7 (M-FEED).

2. Press H J K or L to change the setting shown on the display between

YES (manual feed) and NO (auto feed).

3. When the feed setting is the way you want it, press SET to register it.

To manually feed tape

Press FUNCTION and then PRINT (FEED) to feed the tape 13mm.

Print Density

The print density setting controls how darkly figures are printed on your tapes.

To adjust the print density

1. Press FUNCTION and then 8 (DENSITY).

2. Use H and J to move the underlining to the density setting that you want.

• The lightest setting is 1, while the darkest setting is 5. The standard setting is 3.

• Only four of the five settings that are available can appear on the display. The

display scrolls left and right when necessary to shows all of the available

settings.

3. When the density setting is the way you want it, press SET to register it.

1234

STR?

EFG

1 2 ... 9 10 11 12 13 14 15 16 17 18 19

Comments to this Manuals

No comments

Casio KL-750 User Manual Page 14

Comments to this Manuals

Related products and manuals for Calculators, organizers Casio KL-750