Casio EXILIM EX Z 100 User Manual download pdf (Page 160)

160

Appendix

The flash does not

fire.

1)If

(Flash Off) is selected as the flash mode, change to

another mode (page 26).

2)If the battery is dead, charge it (page 11).

3)If a BEST SHOT scene that uses

(Flash Off) is selected,

change to a different flash mode (page 26) or select a

different BEST SHOT scene (page 50).

Camera powers

down during Self-

timer countdown.

The battery may be dead. Charge the battery (page 11).

The monitor screen

image is out of

focus.

1)You may be using Manual Focus and have not focused the

image. Focus the image (page 61).

2)You may be using

(Macro Mode) for scenery or portraits.

Use Auto Focus for scenery and portrait shots (page 61).

3)You may be trying to use Auto Focus or

)

(Infinity Mode)

when shooting a close-up shot. Use the

(Macro Mode) for

close ups (page 61).

There is a vertical

line in the monitor

screen image.

Shooting a very brightly lit subject can cause a vertical band to

appear in the monitor screen image. This is a CCD

phenomenon known as “vertical smear”, and does not indicate

malfunction of the camera. Note that vertical smear is not

recorded with the image in the case of a snapshot, but it is

recorded in the case of a movie.

There is digital

noise in images.

1)Sensitivity may have been increased automatically for a dark

subject, which increases the chance of digital noise. Use a

light or some other means to illuminate the subject.

2)You may be attempting to shoot in a dark location with

(Flash Off) selected, which can increase digital noise and

make images appear coarse. In this case, turn on flash (page

26) or use lights for illumination.

3)Flash assist or dynamic range may be enabled for snapshots,

which can cause an increase in digital noise. Use a light or

some other means to illuminate the subject.

A recorded image

was not saved.

1)Camera power may have been turned off before the save

operation was complete, which will result in the image not

being saved. If the battery indicator shows , charge the

battery as soon as possible (page 12).

2)You may have removed the memory card from the camera

before the save operation was complete, which will result in

the image not being saved. Do not remove the memory card

before the save operation is complete.

Though available

lighting is bright,

the faces of people

in the image are

dark.

Not enough light is reaching the subjects. Change the flash

mode setting to

(Flash On) for daylight synchro flash (page

26), or adjust EV shift to the + side (page 41).

Problem Possible Cause and Recommended Action

1 ... 159 160 161 ... 171

Comments to this Manuals

No comments

Casio EXILIM EX Z 100 User Manual Page 160

Comments to this Manuals

Related products and manuals for Cameras Casio EXILIM EX Z 100