Casio 3193 User Manual download pdf (Page 3)

Operation Guide 3193 3200

• If the latest reception fails but a previous reception was

successful, an indicator (

) will be on the display.

• The watch will return to normal timekeeping without

changing the time setting if you press D or if you do not

perform any button operation for about one or two

minutes.

Note

• To interrupt a receive operation and return to normal

timekeeping, press D.

If there was a previously

successful reception

If no reception was

successful

Receive failed

To turn auto receive on and off

1. In the Timekeeping Mode, press D to display the last

successful receive time and date screen.

2. Hold down A until the current auto receive setting (ON

or OFF) starts to flash. This is the setting screen.

• Note that the setting screen will not appear if the

currently selected Home City is one that does not

support time calibration reception.

3. Press D to toggle auto receive on (ON) and off

(OFF).

4. Press A to exit the setting screen.

• For information about city codes that support signal

receive, see “To specify your Home City” .

On/Off status

To check the latest signal reception results

Press D to view the last successful receive time and

date. Press D again to return to the previous screen.

• The watch is not in the

Timekeeping Mode.

• Your current Home City is not one

of the following: LIS, LON, MAD,

PAR, ROM, BER, STO, ATH,

MOW, HKG, BJS, TPE, SEL,

TYO, HNL, ANC, YVR, LAX, YEA,

DEN, MEX, CHI, NYC, YHZ, or

YYT

• You changed the time setting

manually.

• The DST setting was changed

manually in the World Time Mode.

• You pressed a button while signal

receive was in progress.

• Even if receive is successful, the

Settings updated indicator will

disappear from the display each

day when the first auto receive

operation of the day is performed.

• Time data (hour, minutes,

seconds) only was received

during the last receive operation.

The Settings updated indicator

appears only when time data and

date data (year, month, day) are

both received.

Cannot perform

manual receive.

Auto receive is

turned on, but

the Settings

updated

indicator does

not appear on

the display.

• Enter the Timekeeping Mode

and try again.

• Select LIS, LON, MAD, PAR,

ROM, BER, STO, AT H,

MOW, HKG, BJS, TPE, SEL,

TYO, HNL, ANC, YVR, LAX,

YEA, DEN, MEX, CHI, NYC,

YHZ, or YYT as your Home

City.

• Perform manual signal

receive or wait until the next

auto signal receive operation

is performed.

• Check to make sure the

watch is in a location where

it can receive the signal.

What you should doProblem Probable Cause

Signal Reception Troubleshooting

Check the following points whenever you experience problems with signal reception.

• For further information, see “Important!” under “Time Calibration Signal Reception”

and “Radio-controlled Atomic Timekeeping Precautions”.

• If the time is one hour off, the

DST setting may be incorrect.

• The Home City code setting is

not correct for the area where

you are using the watch.

• Change the DST setting to

Auto DST.

• Select the correct Home City

code.

Time setting

is incorrect

following

signal

reception.

Tide/Moon Data

In the Tide/Moon Data Mode, you can see the current tide and the current date’s

Moon phase for your Home City. You can specify a date and view tide and Moon data

for that date.

• See “Moon Phase Indicator” for information about the Moon phase indicator and

“Tide Graph” for information about the tide graph.

• All of the operations in this section are performed in the Tide/Moon Data Mode.

Note

• It takes about two seconds to calculate tide graph data. You will not be able to

display a setting screen while data calculation is in progress.

• Moon age is calculated to an accuracy of ±1 day.

Tide Data

The Tide Graph that appears first when you enter the Tide/Moon Data Mode shows

the data at 6:00 a.m. for your currently selected Home City on the current date,

according to the Timekeeping Mode. From there you can specify another date or time.

• If the tide data is not correct, check your Timekeeping Mode settings and correct

them if necessary.

• If you feel that the information shown by the Tide Graph is different from actual tide

conditions, you need to adjust the high tide time. See “Adjusting the High Tide Time”

for more information.

Moon Data

The Moon phase and Moon age information that appears first when you enter the

Tide/Moon Data Mode shows the data at noon for your currently selected Home City

on the current date, according to the Timekeeping Mode. After that you can specify

another date to view data.

• If the Moon data is not correct, check your Timekeeping Mode settings and correct

them if necessary.

• If the Moon phase indicator shows a phase that is a mirror image of the actual moon

phase in your area, you can use the procedure under “Reversing the Displayed

Moon Phase” to change it.

Tide/Moon Data Screens

In the Tide/Moon Data Mode, press A to toggle between the tide data screen and the

Moon data screen.

Tide Data Screen Moon Data Screen

Current tide range

Current

tide level

Month – Day

Moon phase

Time Moon age

Press A.

▲

Month – Day

• When you display the Tide Data Screen, it initially shows tide data for 6:00 a.m..

• Use the Tide Data Screen to specify the Tide Data time. You can use D (+) and

B (–) to change the displayed time in one-hour increments.

• Use the Moon Data Screen to specify the Tide/Moon Data date. You can use D (+)

and B (–) to change the displayed date in one-day increments. Pressing D and B

will display the year of the displayed date.

Adjusting the High Tide Time

Use the following procedure to adjust the high tide time within a particular date. You

can find out high tide information for your area from a tide table, the Internet, or your

local newspaper.

To adjust the high tide time

1. In the Tide/Moon Data Mode, hold down A until the

hour digits start to flash.

2. Use D (+) and B (–) to change the hour setting.

3. When the hour is the setting you want, press C.

• This will cause the minute digits to flash.

4. Use D (+) and B (–) to change the minute setting.

5. When the minute setting is the way you want, press A

to exit the adjustment screen and return to the Tide/

Moon Data Mode screen.

• Pressing D and B at the same time while the time

adjustment screen is displayed (steps 2 through 5

above) will return the high tide time to its initial factory

default setting.

• The high tide time setting is not affected by the DST

(summer time) setting of the Timekeeping Mode.

Hour

Minute

• On some days, there are two high tides. With this watch, you can adjust the first high

tide time only. The second high tide time for that day is adjusted automatically based

on the first high tide time.

Reversing the Displayed Moon Phase

The left-right (east-west) appearance of the Moon depends on whether the Moon is

north of you (northerly view) or south of you (southerly view) as you view it.

You can use the procedure below to reverse the displayed Moon phase so it matches

the actual appearance of the Moon where you are located.

• To determine the viewing direction of the Moon, use a compass to take a direction

reading of the Moon at its meridian passage.

• For information about the Moon phase indicator, see “Moon Phase Indicator”.

To reverse the displayed Moon phase

1. In the Tide/Moon Data Mode, hold down A until the

hour digits start to flash.

2. Press C twice.

• This will cause the Moon phase indicator to flash. This

is the indicator switching screen.

3. Press D to toggle the Moon phase indicator between

the southerly view (indicated by

) and northerly

view (indicated by

• Northerly view: Moon is north of you.

• Southerly view: Moon is south of you.

4. When the Moon phase indicator setting is the way you

want, press A to exit the switching screen and return

to the Tide/Moon Data Mode screen.

World Time

World Time shows the current time in 48 cities (31 time

zones) around the world.

• The times kept in the World Time Mode are

synchronized with the time being kept in the

Timekeeping Mode. If you feel that there is an error in

any World Time Mode time, check to make sure you

have the correct city selected as your Home City. Also

check to make sure that the current time as shown in

the Timekeeping Mode is correct.

• Select a city code in the World Time Mode to display the

current time in any particular time zone around the

globe. See the “City Code Table” for information about

the UTC differential settings that are supported.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C.

Current time in

selected city

City code

To view the time in another city

While in the World Time Mode, use the D (eastward) and B (westward) to scroll

through the city codes (time zones).

• Pressing the D and B at the same time will jump to the UTC time zone.

1 2 3 4 5 6 7 8

Operation Guide 3193 3200 1

Comments to this Manuals

No comments

Casio 3193 User Manual Page 3

Comments to this Manuals

Related products and manuals for Clock Casio 3193