Casio YM-80 Owner's Manual

Wall Mount Bracket YM-80Wall Mount Bracket YM-80CN/JA/EN/DE/FR/ES/IT/SV/RU/PT/TR/NL/PL/FI/CS/NO/LT/TH/ID/MS/VI/TW/KO/AR取扱説明書日本語User’s GuideEnglishBe

EN-9Installing the Wall Mount BracketPositioning the Installation Holes of the Wall Anchor Plate1. Align the marks on the upper edges of the projectio

Installing the Wall Mount BracketEN-101. Remove the screw and then remove the cable guide bracket.2. Pass the cable through the main bracket.3. Return

EN-11Installing the Wall Mount Bracket1. Use the four M4 × 10 screws (included) to attach the projector anchor plate to the projector unit.2. Slide th

Installing the Wall Mount BracketEN-121. Hook the wire on the projector’s hook as shown in the illustration.2. Use an M5 × 10 double sems screw to sec

EN-13Adjusting the Position, Elevation, and AngleImportant!Important!Important!Precautions when Adjusting the Projection Screenz Project onto a board

Adjusting the Position, Elevation, and AngleEN-14Make adjustments so the projected image is positioned properly on the screen.z The procedures in this

EN-15Adjusting the Position, Elevation, and AngleLoosen the adjustment screw, adjust the projected image size, and then re-tighten the adjustment scre

Adjusting the Position, Elevation, and AngleEN-16After loosening the fixing screw and making adjustments with the adjusting knob, tighten the fixing s

EN-17Adjusting the Position, Elevation, and AngleAfter loosening the fixing screw and making adjustments with the adjusting knob, tighten the fixing s

Attaching the CoversEN-18z After adjustments 1 through 6 are complete, tighten the screw with spring washer (fixing screw) securely.Attach the upper a

EN-1Safety Precautions ... EN-2Operating Precautions... EN-3Unpacking ...

EN-19Periodic InspectionPerform the inspections described below once a year.1. Check to make sure that none of the wall mount bracket screws are loose

Printed in JapanImprimé au JaponMA1407-B

EN-2Safety Precautions• Be sure to check that the installation provides sufficient strength and make sure everything is assembled correctly.• Be sure

EN-3Operating Precautionsz After the Projector System is installed, never loosen any of its bolts, screws, or nuts. Adjustment by non-specialists crea

Operating PrecautionsEN-4Concretez CASIO COMPUTER CO., LTD. shall be held in no way liable for any losses due to the bracket and/or projector falling

EN-5UnpackingAs you unpack the product, check to make sure that all of the items listed below are present.Important!Important!Important!Wall anchor pl

EN-6Installing the Wall Mount BracketPrecautions During Installationz Be sure to follow the procedures in this manual to ensure that installation work

EN-7Installing the Wall Mount Bracket1. Referring to “Screen Size and Wall Anchor Plate Mounting Dimension Diagram” (page EN-8), determine the install

Installing the Wall Mount BracketEN-8Screen Size and Wall Anchor Plate Mounting Dimension Diagram[Screen Settings] Aspect Ratio : Full (1280 × 800)z D