Casio AP-25 User Manual download pdf (Page 81)

HD Grid-Lok® GHD8112-X, GHD8118-X DEK Technical Specification

Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.

www.ovation-products.com

Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil

printers, pick and place machines or AOI applications.

HD Grid-Lok® has been optimised specifically for Printing Machine applications. Increased pin

density reduces the load on underside components during printing, improves print quality and

comforms to any given board profile.

The system consists of four components, modules (in kits and available seperately), controller,

manifold/regulator and the operator interface.

Grid-Lok provides full support to the underside of both populated and unpopulated boards. The

systems has two modes of operation

•Stealth’ (Auto) – Dynamically set to each board for every cycle

•Manual – one time set-up using a ‘golden board’

Function

12mm in X, 18mm in YPin Pitch

38mm/1.5”Module width

Supplied mains power supplyController supply Voltage

5.5bar/80psiAir Supply

Maximum 20g, typically <5g, configurable.Force per pin

87mm

HD Grid-Lok Tooling Height (Extended)

70 pins for 18”/457mm or 52 for 12”/305mmNumber of pins, configured in 2 rows

60mm

HD Grid-Lok Tooling Height (Retracted)

Electrically conductive silicone rubber

compound. SE67-CON Conductive Silicone

Pin Cap material

Specification (available options)Capability

The Grid-Lok controller integrates with the DEK machines using the pneumatic input (board

clamps) A sensor is required only when using Pro-Flow and 86mm high modules. Or an

electrical output from the machine provided by DEK as an option.

The modules are located on the table using magnetic strips on the modules

Machine Integration

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 87 88

No comments

Casio AP-25 User Manual Page 81