Casio AP-25 User Manual download pdf (Page 85)

HD Grid-Lok® GHD8712-X, GHD8718-X Ekra Technical Specification

Ovation Products 3864 Courtney Street, Suite 220, Bethlehem, PA 18017, USA.

www.ovation-products.com

Grid-Lok® is the universal, modular, fully automatic PCB Pin support system for stencil

printers, pick and place machines or AOI applications.

HD Grid-Lok® has been optimised specifically for Printing Machine applications. Increased pin

density reduces the load on underside components during printing, improves print quality and

comforms to any given board profile.

The system consists of four components, modules (in kits and available seperately), controller,

manifold/regulator and the operator interface.

Grid-Lok provides full support to the underside of both populated and unpopulated boards. The

systems has two modes of operation

•Stealth’ (Auto) – Dynamically set to each board for every cycle

•Manual – one time set-up using a ‘golden board’

Function

12mm in X, 18mm in YPin Pitch

38mm/1.5”Module width

Supplied mains power supplyController supply Voltage

5.5bar/80psiAir Supply

Maximum 20g, typically <5g, configurable.Force per pin

87mm

HD Grid-Lok Tooling Height (Extended)

70 pins for 18”/457mm or 52 for 12”/305mmNumber of pins, configured in 2 rows

60mm

HD Grid-Lok Tooling Height (Retracted)

Electrically conductive silicone rubber

compound. SE67-CON Conductive Silicone

Pin Cap material

Specification (available options)Capability

The Grid-Lok controller integrates with the Ekra machines using the pneumatic input on the

controller. X3, X4 and X6 require the use of 077_SBA sensor. Other machines can use just

the pneumatic input, it is recommended that all machines use the sensor.

LPSUPP87 (EBS230) will need to be ordered seperately if the machine does not already

have board lifters

The modules are located on the table using magnetic strips on the modules.

Note: E4 will require 305mm/12” modules at the front and back rails to achieve full table

coverage.

Machine Integration

1 2 ... 80 81 82 83 84 85 86 87 88

No comments

Casio AP-25 User Manual Page 85