Casio PV-S6100 User Manual download pdf (Page 122)

120

Chapter 11 Pop Up Tools

To perform constant calculations

1. On the calculator screen, input the first value of the operation, tap an

arithmetic operator key twice, and then input the second value of the

operation.

• You can perform a constant calculation using +, –,

#, or $.

• The first value you input (the one to the left of the arithmetic operator)

is the one that will be used as the constant.

• Tapping an arithmetic operator key twice causes the indicator K to appear

on the display to indicate that a constant calculation is being performed.

2. Tap = to display the result of the operation.

• Inputting 4

# # 2 = would produce a result of 8.

3. Tap = again to multiply the result by the constant.

• Tapping = again with the example shown under step 2 would produce a

result of 32 (8 × 4).

• Each subsequent tap of = multiplies the last result obtained by the

constant. Continuing with the above example, tapping = would produce

the following results: = 128 (32 × 4), = 512 (128 × 4), = 2048 (512 × 4),

and so on.

To correct entries during calculations

• If you enter a wrong value, tap C to clear the value and then input the

correct one.

• If you tap the wrong arithmetic key (+, –,

#, $), simply tap the correct

arithmetic key before inputting anything else.

About calculation errors

An error indicator appears on the display and further calculation becomes

impossible whenever an error occurs.

Error indicator

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 188 189

No comments

Casio PV-S6100 User Manual Page 122